Adjust The Panning And Tilting While Watching The Monitor; Connection; Connecting To A Monitor; Connecting To A Power Supply - Samsung SIR-60 User Manual

Installation

Adjust the panning and tilting while watching the monitor

Tilt Base fixation screw
176˚
176˚
1) You can adjust the camera to point in any direction by using the pan, Tilt
mechanism.
• Pan Base can rotates by ±176°(total 352°)
• Tilt Base covers 75˚ angle.
2) Methods of adjustment
• The case of wall installation
After mounting the camera on a wall, adjust the panning angle so that the correct
... 1
viewing angle is attained and the titling is correctly orientated.
Tighten pan and tilt securing screw.
... 2
• The case of ceiling installation
After mounting the camera on a ceiling, adjust the panning angle so that the correct
... 1
viewing angle is attained and the titling is correctly orientated.
And then adjust the tilting angle by rotating the tilt base.
... 2
Tighten pan and tilt securing screw.
... 3
Notes
• W hen you want to adjust the Pan/Tilt Base, loosen, adjust and then tighten the
Pan/Tilt Base screws.
12
COLOR DOME CAMERA
Pan Base fixation screw
User's Manual
Connecting to Monitor
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
CCTV Camera
• As the connecting method varies with the instruments, refer to the manual supplied with the
instrument.
• Only connect the cable when the power is turned off.
• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device.
CCTV Camera
Connecting to Power
Connect the adaptor to the power input connector as shown in the figure below. The
recommended adaptor specification for SIR-60N/P is DC 12V / 500mA.
---- Power Input Terminal
COLOR DOME CAMERA

Connection

Monitor
Intermediate End monitor
13
User's Manual