Screen Timeout - Savant SST-W100 User Manual

8. To adjust the service interval, use the +/- buttons.
9. Press Reset to clear the service alert and reset the runtimes to zero after maintenance has been completed.
To reset the Heat and Cool runtime hours, follow the steps below:
1. Press the Menu button to get to the Menu Selection screen and go to the Filter Service screen.
2. Press Reset to clear the Heat and Cool runtime values and reset the runtimes to zero.
3. Press the Done button twice to exit back to the main thermostat screen.

Screen Timeout

To set the display timeout. This is the time in seconds that the main thermostat screen will be displayed before it reverts
to the minimized temperature-only display after the last button has been pressed.
1. To adjust the display timeout, use the +/- buttons.
2. Disabled this feature by setting the time to "0".
NOTE: Any button that is pressed, will restore the main thermostat screen.
Savant Wireless Thermostat (SST-W100) User Guide
061313 009-0957-00
12 of 17