Auto Calibration - Scan-Graphics CF Series Maintenance Manual

5.1.21 (L) AUTOCALIBRATION
This function performs exposure and gain normalization automatically. Diagnostic
information is displayed at each step of the process. Otherwise, it is the same as the
Autocalibration available at the scanner keypad.
The following prompt will appear :
Reply with 'N' to escape to the Diagnostics Test Menu.
Reply with 'Y' to do the calibration.
Next "Feed in Calibration Standard" will appear.
Feed in a blank white document to serve as the calibration standard.
Calibration will now proceed automatically and the document will eject upon completion.
"Proceed With Calibration ? [Y/N] : "