Installation; Unpacking - Scan-Graphics CF Series Maintenance Manual

2 INSTALLATION

2.1 Unpacking

The CF Series Scanner comes in a corrugated paper crate mounted to a wooden pallet with four
"air-ball" cushions on the bottom. On the inside are packing materials which prevent the unit from
shifting around. Immediately upon receipt, check for shipping damage and report any found to the
shipper and SCAN-GRAPHICS. When unpacking, discard no materials until you have accounted for
the following contents of the box:
° Quantity 1
° Quantity 1
° Quantity 1
° Quantity 1
In addition, those customers who purchase the optional display video monitor will receive a
corrugated paper box containing:
° Quantity 1
° Quantity 1
° Quantity 1
The easiest method to remove the scanner from the crate is with a fork lift and a lot of caution. A
ramp is provided as part of the packing to allow the CF Series scanner to be removed from the pallet by
only two people. Remove the ramp from its storage location and attach it to the end of the pallet. One
person will guide the scanner down the ramp while the other pushes from the opposite end. Do not
attempt to lift the scanner by the top plate or lid.
CF Series Scanner
Power Cord
CF Series Scanner Operations Manual (A62951-10)
Document Catch
Video Monitor
Power Cable
Video Cable