KDC-X915/X815/PS9016R/PS9080R 3 7 63 1515 0 MICROCOMPUTER'S DESCRIPTION System µ-com: UPD784217GC Terminal description Pin name Function Description Processing Operation P120/RTP0 CHCON1 Changer 1 control Active: Hi P121/RTP1 CH_MUTE Changer muting input MUTE Requested : Hi P122/RTP2 REQH Handshake request to changers...
Page 4
KDC-X915/X815/PS9016R/PS9080R MICROCOMPUTER'S DESCRIPTION 3 7 63 1515 0 Pin name Function Description Processing Operation P87/A7 DIM_CON DIM control P40/AD0 QUAL RDS receiving condition Good: Hi P41/AD1 R_DATA RDS data input P42/AD2 SRM_SUB- SRM sub motor output P43/AD3 SRM_SUB+ SRM sub motor output...
KDC-X915/X815/PS9016R/PS9080R TEST MODE 3 7 63 1515 0 9.Tape test mode 1.Entering the test mode In the initial step, the blank skip is turned off. Reset the unit by pressing the FM key and the Preset 6 key at the same time.
Page 6
KDC-X915/X815/PS9016R/PS9080R TEST MODE 3 7 63 1515 0 13.Simplified method for clearing the 16.Initializing MASK KEY (returning to the security code (Only for type K) default condition from MASK KEY approved state) (1) When code is requested, continue pressing VOL UP key for three seconds while pressing the DISP key.
Page 7
KDC-X915/X815/PS9016R/PS9080R KDC-PS9016R/PS9080R ADJUSTMENT 3 7 63 1515 0 Set the controls and switches as follows. BALANCE: center position BASS: center position LOUD: OFF DOLBY NR: OFF FADER: center position TREBLE: center position ITEM INPUT SETTINGS OUTPUT TUNER ALIGNMENT ALIGN FOR FIG.
KDC-X915/X815/PS9016R/PS9080R PC BOARD (Component/Foil Side View) 3 7 63 1515 0 SWITCH UNIT SWITCH UNIT X13-9710-10 (J74-0983-12) X13-9710-10 (J74-0983-12) FL G FL G MC REQ MC REQ P RESET P RESET SWITCH UNIT SWITCH UNIT (X13-971X-XX) (X13-971X-XX) FL+B FL+B MC CLK...
PC BOARD (Component Side View) PC BOARD (Foil Side View) 3 7 6 3 1 5 1 5 0 ELECTRIC UNIT ELECTRIC UNIT X25-8462-70/8470-10 (J74-1000-12) X25-8462-70/8470-10 (J74-1000-12) C157 R246 R245 C110 ELECTRIC UNIT ELECTRIC UNIT (X25-84XX-XX) (X25-84XX-XX) C124 R211 R171 R172 C126 R180...
PC BOARD (Component Side View) PC BOARD (Foil Side View) 3 7 6 3 1 5 1 5 0 CD PLAYER UNIT CD PLAYER UNIT CD PLAYER UNIT CD PLAYER UNIT (X32-474X-XX) (X32-474X-XX) X32-4740-00/4750-00 (J74-0994-12) X32-4740-00/4750-00 (J74-0994-12) /MUTEL /MUTEL LO/EJ LO/EJ MOTOR MOTOR...
Page 11
(X25-84XX-XX) CORD ANT CONT PNK/BLK BLU/WHT EXT. P. CON CONT ORG/WHT ILLMI 2.2K EXT.AMP CON.SW DC CORD (E30-4782-05) KDC-X915 POWER AMP 4.5V 7.3V 7.2V REAR L FRONT L GRN/BLK WHT/BLK 4V PRE 4V PRE VIOL/BLK GRY/BLK OP AMP OP AMP...
Page 15
Indicates safety critical components. To reduce the between individual instruments or/and units. risk of electric shock, leakage-current or resistance measurements shall be carried out (exposed KDC-X915/X815/PS9016R/PS9080R parts are acceptably insulated from the supply circuit) before the appliance is returned to the customer.
Page 16
KDC-X915/X815/PS9016R/PS9080R EXPLODED VIEW (CD MECHANISM) 3 7 63 1515 0 L 13942296513 u163 Parts with exploded numbers larger than 700 are not suppied.
(D) ......162(mm) 6-3/8(in) (D) ......162(mm) 6-3/8(in) Weight ..........4.2lbs(1.9kg) Weight ..........4.2lbs(1.9kg) u163 KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. KENWOOD CORPORATION 14-6, Dogenzaka 1-chome, Shibuya-ku, Tokyo 150-8501, Japan...