Ds4000 Fc2-133 Components - IBM TotalStorage DS4000 FC2-133 Installation And User Manual

v Supports direct memory access (DMA)
v Supports bus master
v Uses the Fast!UTILbasic input/output system (BIOS) utility program to customize
v Supports fibre channel protocol SCSI (FCP-SCSI) and fibre channel Internet
v Supports point-to-point fabric connection (F_PORT FABRIC LOGIN)
v Supports fibre channel service (Classes 2 and 3)
v Contains two independent channels on a single HBA

DS4000 FC2-133 components

Figure 2 identifies the DS4000 FC2-133 components that are referred to in this
document.
Figure 2. DS4000 FC2-133 components
Each port has its own set of status light emitting diodes (LEDs). Table 8 on page 3
describes the green and amber LEDs and the activity that is indicated by the LEDs.
For more information about the DS4000 FC2-133 LED activity and troubleshooting,
see the installation, user's and maintenance guide for your particular storage server
or IBM TotalStorage DS4000 Problem Determination Guide.
2
IBM TotalStorage DS4000 FC2-133 Dual Port Host Bus Adapter: Installation and User's Guide
the configuration parameters on the DS4000 FC2-133 and attached drives
protocol (FCP-IP)
Bracket
J3
Optical interface connector
Amber LED
Green LED
J4
ISP2312