What You Need For The Installation; Ds4000 Fc2-133 Adapter Components - IBM TotalStorage DS4000 FC2-133 Installation And User Manual

What you need for the installation

To install the DS4000 FC2-133 Adapter in your server, you will need a small Phillips
screwdriver. Depending on your configuration, you might need the following two
items:
v An LC-LC Fibre Channel Cable
v LC-SC Fibre Channel Cable

DS4000 FC2-133 Adapter components

Figure 3 identifies the DS4000 FC2-133 Adapter components that are referred to in
this book.
Figure 3. DS4000 FC2-133 Adapter components
1. This option does not come with the FC2-133 Host Bus Adapter. It must be ordered separately.
4
IBM TotalStorage DS4000 FC2-133 Host Bus Adapter: Installation and User's Guide
a loop)
cable to a device that requires an SC connector)
Green LED
Amber LED
Optical interface connector
1
(enables you to connect Fibre Channel nodes to
1
(enables you to connect an LC-LC Fibre Channel
ISP2312
J3