Topside And Supplies; Winterization Checklist For Boats Stored On Land; Boat Storage; Engines - Sea Ray 175 Sport Owner's Manual

Hide thumbs Also See for 175 Sport:
Table of Contents

Advertisement

S
8 • R
ECTION
Check all terminals for corrosion - corroded
terminals and connectors should be replaced
or thoroughly cleaned.
Tighten all terminals securely and spray them
with light marine preservative oil.
5. F
, H
ITTINGS
OSES AND
Inspect the entire bilge area for evidence of
damage or deterioration. Evidence of
deterioration will first appear around hull fittings,
hoses and clamps.
Straighten kinked hoses.
Replace any hose that does not feel pliable.
Check all hose clamps for tightness and
corrosion. Corroded clamps must be replaced.
Check the nuts, bolts and screws that retain
equipment, hoses, etc. in the bilge for tightness
and corrosion. Corroded fasteners must be
replaced.
B. T
S
OPSIDE AND
UPPLIES
Once a year, you should undertake a thorough
review of the topside equipment, as well as of the
critical safety supplies on your boat.
Check cleats, rings, rails, etc. for loose or
corroded fasteners, breaks, sharp edges or other
conditions that could lead to malfunction or
unsafe use. Repair or replace as necessary.
Inspect PFDs (life jackets) for tears and
deterioration.
Make certain you have enough PFDs on board
for the maximum number of persons you can
carry.
Check your first aid kit, making certain it is
complete and that the items in it have not passed
an expiration date.
Check the signaling equipment and emergency
flares. Make sure all items are within their
expiration dates.
8.4
EQUIRED
M
AINTENANCE
C
LAMPS
I
, S
NSPECTION
Inspect the anchor, mooring and towing lines.
Repair or replace as required.
Check fire extinguishers for full charge.
3. W
INTERIZATION
S
L
TORED ON
AND
A. B
S
OAT
TORAGE
Store boat in a bow high attitude.
Remove hull drain plug.
Pour one (1) pint (half-liter) of 50% water/
antifreeze mixture in each bilge pump sump..
B. E
NGINE
Flush engines with fresh water.
Remove engine drain plugs.
REFER TO YOUR ENGINE OPERATOR'S MANUAL
FOR DETAILED INFORMATION ON PREPARING
THE

ENGINES

WINTERIZATION.
C. B
(
)
ATTERY
IES
Remove from boat. Remove the negative (-)
cable first, then the positive (+) cable.
Remove grease and dirt from top surface.
Grease terminal bolts.
Store on wooden pallet or thick plastic in a cool
dry place. Do not store on concrete.
Keep under a trickle charge.
When placing battery back into service, remove
excess grease from terminals, recharge as
necessary and reinstall in boat.
D. F
S
UEL
YSTEMS
G
:
ASOLINE
Fill fuel tank with gasoline and the
ERVICE AND
C
B
HECKLIST FOR
OATS
FOR
STORAGE
175 Sport
AND

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents