Sea Ray 175 Sport Owner's Manual page 58

S
ECTION
P
ROPELLER
(F . 4.5.1)
IG
PROPELLER
SHAFT THRUST
WASHER
e. Coat the propeller shaft with an anti-seize
lubricant (Figure 4.5.2).
P
(F . 4.5.2)
f. Install the thrust washer, propeller, continuity
washer, thrust hub, propeller nut retainer and
the propeller nut onto the shaft (Figure 4.5.1).
175 Sport
4 • B
ILGE
CONTINUITY
WASHER
PROPELLER
THRUST HUB
PROPELLER
NUT
PROPELLER
NUT RETAINER
COAT WITH ANTI-SEIZE
LUBRICANT
& U
NDERWATER
g. Place a block of wood between the gear case
and the propeller (Figure 4.5.3) and torque the
propeller nut to recommended manufacturer's
specifications. The correct propeller nut torque
is given in your Engine Operator's Manual in
the Owner's Manual Packet.
P
(F . 4.5.3)
h. Secure the propeller nut by bending three (3) of
the tabs of the propeller nut retainer into the thrust
hub grooves (Figure 4.5.4).
P
(F . 4.5.4)
SECURING
G
EAR
GEAR CASE
WOOD BLOCK
TABS
4.5