To remove slot covers 2 and 3, lift up on the latch, remove the latch, and then remove the cover.
o
To remove slot covers 5 and 6, push down on the latch, rotate the latch down, and then remove the
o
cover.
Installing a half-length expansion board
Power down the server (on page 22).
1.
Extend the server from the rack (on page 22).
2.
Remove the access panel (on page 23).
3.
Remove the PCI riser cage (on page 26).
4.
Remove the expansion slot cover
5.
covers" on page 53).
Install the expansion board.
6.
("Expansion board
options" on page 53,
"Removing expansion slot
Hardware options installation 54