Entering An Address With A Zip Code - Clarion NX404 Quick Start Manual & Installation Manual

6. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
destination.
7. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap

3.1.2.8 Entering an address with a ZIP code

All of the above address searching possibilities can be performed with entering the ZIP code instead of
the city/town name. Find below an example with a full address:
1. If you are on the Map screen, tap
2. In the Navigation menu, tap the following buttons:
3. Select the country and state as described earlier (page 35).
4. Enter a new city/town using its ZIP code:
a. Tap
b. Tap
c. Start entering the ZIP code.
d. Find the city/town you need:
•
The most likely ZIP code is always shown in the input field. To accept it, tap
46 NX404 English
to confirm the destination, or tap
and start your journey.
.
to open the numeric keypad.
) appears at the new location. Tap
to select a different
to modify route parameters, or tap
to return to the Navigation menu.
, .
.