The Status Tab; Figure 5-7: Status Tab - Linksys VONAGE PAP2 Ver. 2 Installation And Troubleshooting Manual

The Status Tab

The Status screen displays status information about the system, Phone Adapter, and Internet phone line(s).The
on-screen information will vary depending on the WAN Type selected on the Setup screen.
System
WAN Connection. The status of the Phone Adapter's connection is shown here.
WAN Type. The WAN Type selected on the Setup screen is shown here.
IP Address. The Phone Adapter's local IP Address is shown here.
Subnet Mask. The Phone Adapter's Subnet Mask is shown here.
Default Gateway. The local IP address of your network router is displayed here.
DNS 1-3. Shown here are the DNS (Domain Name System) IP addresses currently used by the Phone Adapter.
MTU. Shown here is the MTU value currently used by the Phone Adapter.
Product
Product Name. The name and version number of the Phone Adapter are shown here.
Firmware Version. This shows the version number of the installed firmware.
MAC Address. The MAC Address of the Phone Adapter is displayed here.
Chapter 5: Using the Phone Adapter's Web-based Utility
The Status Tab
Phone Adapter with 2 Ports for Voice-over-IP

Figure 5-7: Status Tab

mac address: the unique address that a
manufacturer assigns to each networking
device.
23