IBM 9117-MMB User Manual page 86

Attention: Before returning the system to the customer, remove the system from service mode. If the
system is left in service mode, it automatically places a call for service every two hours.
v While you were performing the problem analysis on the original serviceable event, other
serviceable-event numbers might have been opened. Close all serviceable events that were opened as a
result of your service activity.
v Server verification has been performed and there are no problems that require additional service
actions.
v If the repair was done using the HMC online repair procedures, ensure that the original serviceable
event is now closed.
1. Is a management console used to manage the server that you are servicing?
v Yes: Continue with the next step.
v No: Return to the "Verifying a repair" on page 67. This ends the procedure.
2. Are you closing a service event that was a repair on the management console personal computer?
v Yes: Continue with the next step.
v No: Go to step 4.
3. Power on the management console. Did the power-on process complete without errors?
v Yes: Ensure that the management console can be used to perform server management tasks, and return the
management console to normal operations. Go to "Closing a service call" on page 75. This ends the procedure.
v No: Go to the HMC isolation procedures. This ends the procedure.
Log into the management console as the service representative. If invalid user or invalid password
4.
displays, get the correct login information from the system administer.
1. If logged on the System Manager, select Exit from the Console, located on the System Manager window.
2. Login to the System Manager with the following: User identification service Password service mode
5. View Serviceable Event Details.
1. In the navigation area, select the Service Applications icon.
2. In the navigation area, select the Service Focal Point icon.
3. In the Contents area, select Manage Serviceable Events.
4. Designate the set of Serviceable Events you want to view. When
you are finished, click OK. The Service Event Overview window
opens.
6. Close open or delayed events.
1. Select the problem to close, on the Service Event Overview window.
2. Select the menu Selected, located on the menu bar.
3. Click Close Event.
4. Enter your comments in the Serviceable Event Comments window, and click Close Event.
5. Close all events associated with the problem on which you were working.
7. Did the Service Event Overview window contain the event or events on which you were working?
v Yes: Return the HMC to normal operations. Go to "Closing a service call" on page 75. This ends the procedure.
v No: Go to Detecting problems. This ends the procedure.
74
Power Systems: Power supplies for the 9117-MMB, 9117-MMC, 9179-MHB, or 9179-MHC
Note: Only the events that match all of the
criteria you specify are shown.