Bluetooth Module - HP Compaq 6520s Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kits do not include a Bluetooth module cable. The
Bluetooth module cable is included in the Cable Kit, spare part number 457400-001. See
on page 21
Description
For use in all countries and regions except Japan and Asia Pacific countries and regions
For use only Japan and Asia Pacific countries and regions
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Speaker (see
f. Display lid switch module (see
g. Display assembly (see
h. Top cover (see
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable (1) from the system board.
2. Remove the two Phillips PM2.0×4.0 screws (2) that secure the Bluetooth module to the base
enclosure.
64 Chapter 4 Removal and replacement procedures
for more Cable Kit spare part number information.
Battery on page
Hard drive on page
Optical drive on page
Switch cover and keyboard on page
Switch cover and keyboard on page
Speaker on page
Display assembly on page
Top cover on page
37).
38)
45)
47)
51)
Display lid switch module on page
53)
58)
Spare part number
398393-001
450066-001
47)
52)
Cable Kit