HP Compaq 6520s Maintenance And Service Manual page 85

e. Speaker (see
f. Display lid switch module (see
g. Display assembly (see
h. Top cover (see
i. System board (see
Remove the processor:
1. Turn the system board upside down, with the USB connectors toward you.
2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
3. Lift the processor (2) straight up and remove it.
NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned
with the triangle (4) embossed on the processor slot.
Reverse this procedure to install the processor.
Speaker on page 51)
Display lid switch module on page
Display assembly on page
Top cover on page 58)
System board on page
53)
66)
Component replacement procedures
52)
75