Display Assembly - HP Compaq 6520s Maintenance And Service Manual

Display assembly

NOTE: All display assembly spare part kits include 2 WLAN antenna transceivers and cables.
Description
14.1-inch, WXGA BrightView display assembly for use only with computer models equipped with
discrete graphics subsystem memory
14.1-inch, WXGA display assembly for use only with computer models equipped with discrete
graphics subsystem memory
14.1-inch, WXGA BrightView display assembly for use only with computer models equipped with
UMA graphics subsystem memory
14.1-inch, WXGA display assembly for use only with computer models equipped with UMA
graphics subsystem memory
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
on page
6. Remove the following components:
a. Keyboard (see
b. Switch cover (see
c. Speaker (see
d. Display lid switch module (see
Remove the display assembly:
1. Close the computer and turn it upside down, with the rear panel toward you.
Battery on page
40).
Switch cover and keyboard on page
Switch cover and keyboard on page
Speaker on page
37).
47)
51)
Display lid switch module on page
Component replacement procedures
Spare part number
456598-001
456597-001
456596-001
456595-001
WLAN module
47)
52)
53