Hp Coolsense; Refreshing Your Software Content With Intel Smart Connect Technology (Select Models Only); Shutting Down (Turning Off) The Computer - HP Notebook User Manual

1. Shut down the computer.
2. Connect the AC adapter to the computer, and then plug it into an AC outlet.
3. Turn on the computer.
If the power lights turn
●
If the power lights remain
●
and the connection from the AC adapter to the AC outlet to be sure that the connections
are secure.
If the connections are secure and the power lights remain
●
functioning and should be replaced.
Contact support for information about obtaining a replacement AC power adapter.

HP CoolSense

HP CoolSense
adjusts performance and fan settings to keep the surface temperature of your computer at the
optimum level of comfort.
When HP CoolSense is off, the position of the computer is not detected and the performance and fan
options remain at the factory setting. As a result, the surface temperature of the computer might be
higher than it would be with HP CoolSense on.
To turn CoolSense off or on, follow these steps:
From the Start screen, type coolsense, and then select HP CoolSense.
▲
Refreshing your software content with Intel Smart Connect
Technology (select models only)
When the computer is in the Sleep state, Intel® Smart Connect Technology periodically causes the
computer to exit Sleep. If a network connection is available, Smart Connect updates open apps such
as your email inboxes, social network sites, and news pages and then returns the computer to the
Sleep state. Smart Connect also syncs content that you have created offline, such as emails. When
the computer exits Sleep, you have immediate access to your updated information.
To enable this feature or manually adjust the settings, from the Start screen, type smart, and
▲
then select Intel® Smart Connect Technology.

Shutting down (turning off) the computer

CAUTION:
before shutting down the computer.
The Shut down command closes all open programs, including the operating system, and then turns
off the display and computer.
Shut down the computer under any of the following conditions:
56 Chapter 6 Managing power
on , the AC adapter is working properly.
off , check the connection from the AC adapter to the computer
automatically detects when the computer is not on a horizontal surface and
Unsaved information is lost when the computer shuts down. Be sure to save your work
off , the AC adapter is not