1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. Notebook
  6. User manual

HP Notebook User Manual

Hide thumbs Also See for Notebook:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, User Manual
HP Notebook
User Guide

Advertisement

Table of Contents
loading

Related Manuals for HP Notebook

Summary of Contents for HP Notebook

  • Page 1 HP Notebook User Guide...
  • Page 2 Bluetooth is a trademark owned by its common to most models. Some features otherwise using any software product proprietor and used by Hewlett-Packard may not be available on your computer. preinstalled on this computer, you agree to Company under license. SD Logo is a...
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Welcome ................................1 Finding information ..........................2 2 Getting to know your computer ........................3 Top ............................... 3 TouchPad ..........................3 Lights ........................... 4 Buttons and fingerprint reader (select models only) ............5 Keys ............................. 7 Front ..............................
  • Page 6 Turning the embedded numeric keypad on and off ......20 Switching key functions on the embedded numeric keypad ..... 20 Using the integrated numeric keypad ..............21 Using an optional external numeric keypad ............21 Using the TouchPad ........................... 21 Turning the TouchPad off and on ..................
  • Page 7 Identifying low battery levels ................33 Resolving a low battery level ................34 Resolving a low battery level when external power is available ..34 Resolving a low battery level when a charged battery is available ... 34 Resolving a low battery level when no power source is available ..34 Resolving a low battery level when the computer cannot exit Hibernation ..................
  • Page 8 10 Security ................................ 54 Protecting the computer ........................54 Using passwords ..........................54 Setting passwords in the operating system ............... 55 Setting passwords in Computer Setup ................55 Managing a BIOS administrator password ............56 Entering a BIOS administrator password ............56 Using a Computer Setup DriveLock password ..............
  • Page 9 Setting a MultiBoot Express prompt .................. 69 Entering MultiBoot Express preferences ................69 Appendix A Troubleshooting and support ....................70 Troubleshooting ..........................70 The computer is unable to start up ..................70 The computer screen is blank .................... 70 Software is functioning abnormally ..................70 The computer is on but is not responding ................

  • Page 11: Welcome

    Welcome After you set up and register the computer, take the following steps: ● Connect to the Internet—Set up your wired or wireless network so that you can connect to the Internet. For more information, see Networking on page ● Get to know your computer—Learn about your computer features.

  • Page 12: Finding Information

    North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd, Boise, ID 83714, USA ● Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy ● Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 When you request a printed copy of your warranty, please include your product number, warranty period (found on your service label), name, and postal address.

  • Page 13: Getting To Know Your Computer

    Getting to know your computer TouchPad NOTE: Your computer may look slightly different from the illustration in this section. Component Description TouchPad on/off button Turns the TouchPad on and off. TouchPad zone Moves the pointer and selects or activates items on the screen.

  • Page 14: Lights

    Lights NOTE: Your computer may look slightly different from the illustration in this section. Component Description ● Power light On: The computer is on. ● Blinking: The computer is in the Suspend state. ● Off: The computer is off or in Hibernation. Microphone mute light Amber: Microphone is off.

  • Page 15: Buttons And Fingerprint Reader (Select Models Only)

    Buttons and fingerprint reader (select models only) NOTE: Your computer may look slightly different from the illustration in this section. Component Description ● Power button When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Suspend.
  • Page 16 Component Description Volume mute button Mutes and restores speaker sound. Fingerprint reader (select models only) Allows a fingerprint logon instead of a password logon. Chapter 2 Getting to know your computer...

  • Page 17: Keys

    Keys NOTE: Refer to the illustration that most closely matches your computer. Component Description Executes frequently used system functions when pressed in combination with a function key. Operating system logo key Displays the operating system menu. Function keys Execute frequently used system functions when pressed in combination with the key.
  • Page 18 Component Description Executes frequently used system functions when pressed in combination with a function key. Operating system logo key Displays the operating system menu. Function keys Execute frequently used system functions when pressed in combination with the key. num lk Turns the embedded numeric keypad on and off when pressed in combination with the key.

  • Page 19: Front

    Front Component Description ● Hard drive light Blinking white: The hard drive or optical drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive. Media Card Reader Supports the following digital card formats: ● MultiMediaCard (MMC) ●...

  • Page 20: Right

    Right Component Description Audio-out (headphone) jack Produces sound when connected to optional powered stereo speakers, headphones, earbuds, a headset, or television audio. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety, and Environmental Notices.

  • Page 21: Left

    Left Component Description Power connector Connects an AC adapter. ● AC adapter/Battery light Amber: The computer is connected to external power and the battery is charged from 0 to 89 percent. ● White: The computer is connected to external power and the battery is charged from 90 to 99 percent.

  • Page 22: Display

    Display Component Description WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLAN). Internal microphones (2) Record sound. Webcam light On: The webcam is in use. Webcam Records video and captures still photographs. Internal display switch Turns off the display or initiates Suspend if the display is closed while the power is on.

  • Page 23: Bottom

    Bottom Component Description ● Battery and service cover release Releases the battery from the battery bay by latches sliding the release latches one time. ● When the battery has been removed from the battery bay, releases the service cover from the computer by sliding the release latches a second time.

  • Page 24: Networking

    Networking Your computer may support one or both of the following types of Internet access: ● Wireless—For mobile Internet access, you can use a wireless connection. See Connecting to an existing WLAN on page 15 Setting up a new WLAN on page ●...

  • Page 25: Using The Operating System Controls

    NOTE: Getting to know your computer on page 3 for information on identifying the type and location of the wireless button on your computer. Using the operating system controls To enable or disable a wireless or wired network device: Right-click the Network Connection icon in the notification area, at the far right of the taskbar. To enable or disable one of the following devices, select or clear one of the following options: ●...

  • Page 26: Setting Up A New Wlan

    Setting up a new WLAN Required equipment: ● A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider (ISP) ● A wireless router (purchased separately) (2) ● The wireless computer (3) The illustration below shows an example of a wireless network installation that is connected to the Internet.

  • Page 27: Roaming To Another Network

    NOTE: HP recommends that you select WPA2, which is the most advanced of the three encryption protocols. The use of WEP encryption is not recommended, because it can be overcome with little effort. ● Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) use security standards to encrypt and decrypt data transmitted over the network.

  • Page 28: Connecting To A Wired Network

    Connecting to a wired network Connecting to a local area network (LAN) (select models only) Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.

  • Page 29: Keyboard And Pointing Devices

    Keyboard and pointing devices Using the keyboard Identifying the hot keys A hot key is a combination of the key (1) and one of the function keys (2). To use a hot key: ▲ Briefly press the key, and then briefly press the second key of the hot key combination. hot key combination Description fn+f3...

  • Page 30: Using The Embedded Numeric Keypad

    Using the embedded numeric keypad Component Description Turns the embedded numeric keypad on and off when pressed in combination with the num lk key. NOTE: The embedded numeric keypad will not function while an external keyboard or numeric keypad is connected to the computer.

  • Page 31: Using The Integrated Numeric Keypad

    Using the integrated numeric keypad Component Description num lk Alternates between the navigational and numeric functions on the integrated numeric keypad. NOTE: The keypad function that is active when the computer is turned off is reinstated when the computer is turned back on. Integrated numeric keypad When num lk...

  • Page 32: Turning The Touchpad Off And On

    Turning the TouchPad off and on To turn the TouchPad off and on, quickly double-tap the TouchPad on/off button. Navigating To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go. Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse.

  • Page 33: Tapping

    To view information about each gesture: Select Computer > More Applications. In the left pane, click System, and then click the TouchPad icon in the right pane. On the Device Settings tab, click the device, and then click Settings. Click the gesture to view information about its features. To turn the gestures on and off: Select Computer >...

  • Page 34: Pinching/Zooming

    Pinching/Zooming Pinching allows you to zoom in or out on images or text. ● Zoom in by placing two fingers together on the TouchPad, and then moving them apart. ● Zoom out by placing two fingers apart on the TouchPad, and then moving them together. Rotating Rotating allows you to rotate items such as photos.

  • Page 35: Multimedia

    Multimedia Your computer includes the following: ● Integrated speakers ● Integrated microphones ● Integrated webcam ● Preinstalled multimedia software ● Multimedia buttons or keys Using the audio features Your computer enables you to use a variety of audio features: ● Play music.

  • Page 36: Checking Your Audio Functions

    Checking your audio functions To check the system sound on your computer, follow these steps: Select Computer > Control Center. In the left pane, click Hardware, and then click Sound in the right pane. Click the Sound Effects tab, and then select one of the sound options under Choose an alert sound to test each sound.
  • Page 37 ▲ To connect a VGA display device, connect the device cable to the external monitor port. Press fn+f4 to switch the image between the display devices connected to the computer. NOTE: Pressing fn+f4 allows you to switch between settings. You can toggle between a laptop panel, an external display in combination with the laptop panel, or one of the external monitors.

  • Page 38: Hdmi

    Your display settings can be modified by clicking your monitor in the dialog box, and then selecting the Display properties tab or Multi-Display tab. After the settings are configured, click Apply, and then click OK. Your computer may require rebooting. HDMI The HDMI port connects the computer to an optional video or audio device, such as a high-definition television.

  • Page 39: Power Management

    Power management Shutting down the computer CAUTION: Unsaved information will be lost when the computer is shut down. The shutdown command closes all open programs, including the operating system, and then turns off the display and computer. Shut down the computer under any of the following conditions: ●...

  • Page 40: Initiating And Exiting Suspend

    Initiating and exiting Suspend The system is set at the factory to initiate Suspend after a period of inactivity when running on battery power or on external power. Power settings and timeouts can be changed using Power Management in Control Center. With the computer on, you can initiate Suspend in any of the following ways: ●...

  • Page 41: Viewing The Current Power Management Settings

    You can customize power management settings. Viewing the current power management settings ▲ Right-click the Power icon in the notification area, at the far right of the taskbar, and then click Preferences. Changing the current power management settings Right-click the Power icon in the notification area, at the far right of the taskbar, and then click Preferences.

  • Page 42: Charging A Battery

    The battery release latch automatically locks the battery into place. To remove the battery: CAUTION: Removing a battery that is the sole power source may cause loss of information. To prevent loss of information, save your work and initiate Hibernation or shut down the computer before removing the battery.

  • Page 43: Maximizing Battery Life

    Charging may take longer if a battery is new, has been unused for 2 weeks or more, or is much warmer or cooler than room temperature. To prolong battery life and optimize the accuracy of battery charge displays, follow these recommendations: ●...

  • Page 44: Resolving A Low Battery Level

    Resolving a low battery level Resolving a low battery level when external power is available ▲ Connect the computer to external power using one of the following devices: ● AC adapter ● Optional docking or expansion device ● Optional power adapter purchased as an accessory from HP Resolving a low battery level when a charged battery is available Turn off the computer or initiate Hibernation.

  • Page 45: Disposing Of A Used Battery

    Disposing of a used battery WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. See the Regulatory, Safety, and Environmental Notices for battery disposal information. Replacing the battery Computer battery life varies, depending on power management settings, programs running on the computer, display brightness, external devices connected to the computer, and other factors.
  • Page 46 To test the AC adapter: Shut down the computer. Remove the battery from the computer. Connect the AC adapter to the computer, and then plug it into an AC outlet. Turn on the computer. ● If the power lights turn on, the AC adapter is functioning properly. ●...

  • Page 47: Drives

    Drives Handling drives CAUTION: Drives are fragile computer components that must be handled with care. See the following cautions before handling drives. Additional cautions are included with the procedures to which they apply. Observe these precautions: ● Before you move a computer that is connected to an external hard drive, initiate Suspend and allow the screen to clear, or properly disconnect the external hard drive.

  • Page 48: Removing Or Replacing The Service Cover

    To use the security screw: Remove the battery. CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work and shut down the computer through the operating system before removing the battery. Remove the security screw from inside the battery bay (1) and insert it (2) to lock the service cover in place.

  • Page 49: Removing The Service Cover

    Removing the service cover Remove the service cover to access the memory module slot, hard drive, regulatory label, and other components. To remove the service cover: Remove the battery (see Inserting or removing the battery on page 31). With the battery bay toward you, remove the optional security screw (1), (if the optional security screw is being used, see Using the optional security screw on page 37), and then slide the...

  • Page 50: Replacing Or Upgrading The Hard Drive

    Slide the service cover towards the battery bay until the service cover snaps into place (4), and if you choose to, insert and tighten the optional security screw (5) to hold the service cover in place. For more information on using the optional security screw, see Using the optional security screw on page NOTE:...
  • Page 51 Unplug the power cord from the AC outlet. Turn the computer upside down on a flat surface with the front of the computer toward you. Remove the battery (See Inserting or removing the battery on page 31.) Remove the service cover (see Removing or replacing the service cover on page 38).

  • Page 52: Installing A Hard Drive

    Lift the hard drive (2) out of the hard drive bay. Installing a hard drive To install a hard drive: Angle the hard drive into the hard drive bay aligning the tabs on the battery (1) with the notches on the computer, and then lower the hard drive (2) into the hard drive bay. Chapter 7 Drives...
  • Page 53 Pull the hard drive tab (3) toward the center of the computer until the hard drive is seated. Tighten the 4 hard drive screws to secure the hard drive. Replacing or upgrading the hard drive...

  • Page 54: Using Optical Drives (Select Models Only)

    Replace the service cover (see Removing or replacing the service cover on page 38). Replace the battery (See Inserting or removing the battery on page 31.) Turn the computer right-side up, and then reconnect AC power and external devices to the computer.

  • Page 55: Removing An Optical Disc

    Gently press the disc (3) down onto the tray spindle until the disc snaps into place. Close the disc tray. NOTE: After you insert a disc, a short pause is normal. If you have not selected a media player, an AutoPlay dialog box opens.

  • Page 56: When The Disc Tray Fails To Open

    Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. Close the disc tray and place the disc in a protective case.
  • Page 57 Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. Close the disc tray and place the disc in a protective case.

  • Page 58: External Cards And Devices

    External cards and devices Using Media Card Reader cards (select models only) Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital cameras and PDAs as well as with other computers. To determine which digital card formats that are supported on your computer, see Getting to know your computer on page Inserting a digital card...

  • Page 59: Using A Usb Device

    Press in on the card (1), and then remove it from the slot (2). NOTE: If the card is not ejected, pull the card out of the slot. Using a USB device Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub.

  • Page 60: Connecting A Usb Device

    Connecting a USB device CAUTION: To prevent damage to a USB connector, use minimal force to connect a USB device. NOTE: The USB port on your computer may look slightly different from the illustration in this section. To connect a USB device to the computer, connect the USB cable for the device to the USB ▲...

  • Page 61: Memory Modules

    Memory modules The computer has one memory module compartment. The capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module.
  • Page 62 Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
  • Page 63 Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. Replace the hard drive door. (See Replacing or upgrading the hard drive on page 40.) Replace the battery and the service cover.

  • Page 64: 10 Security

    10 Security Protecting the computer NOTE: Security solutions are designed to act as deterrents, but they may not deter software attacks or prevent the computer from being mishandled or stolen. Security features provided with your computer can protect the computer, personal information, and data from a variety of risks.

  • Page 65: Setting Passwords In The Operating System

    Use the following tips for creating and saving passwords: ● When creating passwords, follow requirements set by the program. ● Write down your passwords and store them in a secure place away from the computer. ● Do not store passwords in a file on the computer. The following tables list commonly used passwords and describe their functions.

  • Page 66: Managing A Bios Administrator Password

    Managing a BIOS administrator password To set, change, or delete this password, follow these steps: Open Computer Setup by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed, press f10.

  • Page 67: Managing A Drivelock Password

    Managing a DriveLock password To set, change, or delete a DriveLock password in Computer Setup, follow these steps: Turn on the computer, and then press while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Press to enter Computer Setup.

  • Page 68: Installing An Optional Security Cable

    There are two types of firewalls to consider: ● Host-based firewalls—Software that protects only the computer it is installed on. ● Network-based firewalls—Network based firewalls are installed between the computers on the network and the connection to the Internet. Network based firewalls can be dedicated devices or devices such as routers or switches with firewall capability.

  • Page 69: Using The Fingerprint Reader (Select Models Only)

    Using the fingerprint reader (select models only) An integrated fingerprint reader is available on select computer models. In order to use the fingerprint reader, you must set up a user account with a password on the computer. This account allows you to log on to your computer with a swipe of a designated finger.

  • Page 70: 11 Backup And Recovery

    11 Backup and Recovery Recovery after a system failure is as good as your most recent backup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup.

  • Page 71: Backing Up Your Information

    Backing up your information You should back up your computer files on a regular schedule to maintain a current backup. You can manually back up your information to an optional external drive, a network drive, or discs. Back up your system at the following times: ●...

  • Page 72: Computer Setup (Bios) And Advanced System Diagnostics

    12 Computer Setup (BIOS) and Advanced System Diagnostics Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup includes settings for the types of peripherals installed, the startup sequence of the computer, and the amount of system and extended memory.

  • Page 73: Restoring Factory Settings In Computer Setup

    To exit Computer Setup menus, choose one of the following methods: ● To exit Computer Setup menus without saving your changes, click the Exit icon in the lower-left corner of the screen, and then follow the on-screen instructions. – or – Use the key and the arrow keys to select File >...

  • Page 74: Determining The Bios Version

    Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than those currently installed on the computer, you need to know the version of the system BIOS currently installed. BIOS version information (also known as ROM date and System BIOS) can be displayed as follows: Start Computer Setup.

  • Page 75: Using Advanced System Diagnostics

    Using Advanced System Diagnostics Advanced System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is functioning properly. The following diagnostic tests are available in Advanced System Diagnostics: ● Start-up test—This test analyzes the main computer components that are required to start the computer.

  • Page 76: 13 Multiboot

    The factory setting is for the computer to select the boot device by searching enabled boot devices and drive bay locations in the following order: NOTE: Some of the boot devices and drive bay locations listed may not be supported on your computer. ● Notebook upgrade bay ● Optical drive ● Notebook hard drive ●...

  • Page 77: Enabling Boot Devices In Computer Setup

    Enabling boot devices in Computer Setup The computer will boot to a USB device or a NIC device only if the device has first been enabled in Computer Setup. To start Computer Setup and enable a USB device or a NIC device as a boot device, follow these steps: Turn on or restart the computer, and then press while the “Press the ESC key for Startup...

  • Page 78: Choosing Multiboot Preferences

    ● The computer will boot from a NIC device only if the device has been enabled in the Built-In Device Options menu of Computer Setup and if booting from the device has been enabled in the Boot Options menu of Computer Setup. Booting from a NIC does not affect logical drive designations because no drive letter is associated with the NIC.

  • Page 79: Dynamically Choosing A Boot Device Using The F9 Prompt

    Dynamically choosing a boot device using the f9 prompt To dynamically choose a boot device for the current startup sequence, follow these steps: Open the Select Boot Device menu by turning on or restarting the computer, and then pressing while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.

  • Page 80: Appendix A Troubleshooting And Support

    Troubleshooting and support Troubleshooting The following sections describe several common issues and solutions. The computer is unable to start up If the computer does not turn on when you press the power button, the following suggestions may help you determine why the computer does not start up: ●...

  • Page 81: The Computer Is Unusually Warm

    CAUTION: Emergency shutdown procedures result in the loss of unsaved information. ● Press and hold the power button for at least 5 seconds. ● Disconnect the computer from external power and remove the battery. The computer is unusually warm It is normal for the computer to feel warm to the touch while it is in use. But if the computer feels unusually warm, it may be overheating because a vent is blocked.

  • Page 82: The Optical Disc Tray Does Not Open For Removal Of A Cd Or Dvd

    The optical disc tray does not open for removal of a CD or DVD Insert the end of a paper clip (1) into the release access in the front bezel of the drive. Press in gently on the paper clip until the disc tray is released, and then pull out the tray (2) until it stops.

  • Page 83: The Computer Does Not Detect The Optical Drive

    The computer does not detect the optical drive If your operating system does not detect an installed device, the device driver software may be missing or corrupted. Remove any discs from the optical drive. Click Computer and then click System Monitor. On the Hardware tab, identify the Storage Controller in the Type column.

  • Page 84: The Process Of Burning A Disc Does Not Begin, Or It Stops Before Completion

    The process of burning a disc does not begin, or it stops before completion ● Be sure that all other programs are closed. ● Turn off Suspend mode and Hibernation. ● Be sure that you are using the right kind of disc for your drive. ●...

  • Page 85: Labels

    Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer: ● Serial number label—Provides important information, including the following: Component Product name Serial number (s/n) Part number/product number (p/n) Warranty period Model description Have this information available when you contact support.

  • Page 86: Appendix B Cleaning Your Computer

    Cleaning your computer Cleaning products Use the following products to safely clean and disinfect your computer: ● Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (For example: germicidal disposable wipes. These wipes come in a variety of brand names.) ● Alcohol-free glass cleaning fluid ●...

  • Page 87: Cleaning The Touchpad And Keyboard

    Cleaning the TouchPad and keyboard CAUTION: When cleaning the TouchPad and keyboard, do not let liquids drip between the keys. This can permanently damage internal components. ● To clean and disinfect the TouchPad and keyboard, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously or use an acceptable germicidal disposable wipe.

  • Page 88: Appendix C Specifications

    Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz.

  • Page 89: Appendix D Electrostatic Discharge

    Electrostatic discharge Electrostatic discharge is the release of static electricity when two objects come into contact—for example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components.

  • Page 90: Index

    Index volume 25 drives AC adapter/battery light 11 volume mute 6 boot order 66 action keys wireless 5 handling 37 volume 25 airport security devices 37 cables electrostatic discharge 79 audio features 25 LAN 18 embedded numeric keypad keys, audio functions, checking 26 USB 50 identifying 7 audio-in (microphone) jack,...
  • Page 91 Suspend 19 microphone mute light, switching screen image 19 labels identifying 4 hotkeys Bluetooth 75 mouse, external description 19 HP Mobile Broadband setting preferences 24 using 19 Module 75 MultiBoot Express 66, 69 hubs 49 regulatory 75 serial number 75 network cable 18 SIM 75 icons...
  • Page 92 power lights 4 tapping 23 wireless network (WLAN) 18 power, conserving 34 zooming 24 connecting 15 product name and number, TouchPad zone corporate WLAN connection computer 75 identifying public WLAN connection 15 traveling with the computer 34, described 14 PXE server 67 equipment needed 16 tray-load optical drive 44 public WLAN connection 15...

Table of Contents