HP Notebook User Manual page 19

Component
(6) Security cable slot
Component
(1) Power light
(2) Hard drive light
(3) Audio-out (headphone)/Audio-in
(microphone) jack
Description
NOTE: For disc compatibility information, go to the Help
and Support web page (see
on page 3). Follow the web page instructions to select your
computer model. Select Drivers & Downloads, and then
follow the on-screen instructions.
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a
deterrent, but it may not prevent the computer from being
mishandled or stolen.
Description
On: The computer is on.
●
Blinking: The computer is in the Sleep state, a power-
●
saving state. The computer shuts off power to the
display and other unneeded components.
Off: The computer is off or in Hibernation. Hibernation
●
is a power-saving state that uses the least amount of
power.
Blinking white: The hard drive is being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the
●
hard drive.
NOTE: For information about HP 3D DriveGuard,
see Using HP 3D DriveGuard on page
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also
connects an optional headset microphone. This jack does
not support optional microphone-only devices.
WARNING! To reduce the risk of personal injury, adjust
the volume before putting on headphones, earbuds, or a
headset. For additional safety information, refer to the
Regulatory, Safety, and Environmental Notices . To access
this guide, from the Start screen, type support, and then
select the HP Support Assistant app.
NOTE: When a device is connected to the jack, the
computer speakers are disabled.
NOTE: Be sure that the device cable has a 4-conductor
connector that supports both audio-out (headphone) and
audio-in (microphone).
More HP resources
59.
Right side 7