Hard disk drive removal
1. Remove the rear bucket housing, see "Rear bucket housing (rear cover)
2. To release the hard disk drive, use a flat-blade screw driver to pry the latch as
3. Rotate the hard disk drive outward, and disconnect the power and signal
4. Lift the hard disk drive up and back to release the hook from the rear EMC
Rear EMC cover assembly removal
The rear EMC cover must be removed in order to remove the system board.
1. Remove the rear bucket housing, see "Rear bucket housing (rear cover)
removal" on page 21.
shown.
cables from the drive.
cover.
removal" on page 21.
Chapter 4. FRU replacements
23