Connecting To Your Monitor - Audiovox AVDBR1 Owner's Manual

Installation

Connecting to Your Monitor

HDMI Jack
Video connections to a monitor can be done
with a HDMI cable (not supplied) if your
monitor has a HDMI input.
1. Turn off the power to the Blu-ray player
and the monitor(s) before making any
connections.
2. Connect the HDMI OUT jack on the
rear of the unit to the HDMI IN jack on
your monitor using a HDMI cable (not
included).
3. Select the resolution of the player's
HDMI output signals to match your
monitor's resolution capabilities. See the
instructions on page 26 for details.
Monitor
HDMI cable
(not supplied
To HDMI
output
Notes
• Refer to the owner's manual of the
connected monitor as well.
• HDMI, the HDMI logo and High-
Defi nition Multimedia Interface are
trademarks or registered trademarks of
HDMI licensing LLC.
• If your monitor is a high defi nition
monitor with an HDMI input, we highly
recommend you use the player's HDMI
output to get the highest possible video
resolution.
LINE OUTPUT Jacks (Audio and Video)
Video connections to a monitor can be done
with RCA-type video connections.
1. Turn off the power to the Blu-ray player
and the monitor(s) before making any
connections.
2. Connect the LINE OUTPUT jacks on the
rear of the unit to the AUDIO/VIDEO IN
jacks on your monitor using an audio/
video cable (supplied).
Match the color-coded plugs to the
appropriate jacks: Yellow (video) to
Yellow, White (left audio) to White, and
Red (right audio) to Red.
To HDMI
Audio/Video cable
input
(supplied)
)
Rear of
the unit
Notes
• If one of the devices is not working,
check that all the cables have been
inserted properly into the jacks.
• If your component has only one input
for audio (mono), connect it to the
left (white L/Mono) audio jack on the
monitor and don't connect the right
audio part of the cable.
- 10 -
Monitor
AUDIO
IN
VIDEO IN
Rear of the unit
Audio/Video cable
(supplied)