Connecting To A Device; Connecting To Video Equipment - Epson EH-TW9100W User Manual

Preparing

Connecting to a Device

Attention
•
Turn off the equipment you want to connect before connecting. If the equipment is on when you connect,
it could cause a malfunction.
•
Check the shape of the cable's connector and the shape of the port, and then connect. If you force a connector
of a different shape into the port, it could cause damage and a malfunction to occur.
EH-TW9100W/EH-TW8100W comes with an interface cover allowing you to clearly see the connector section
on the rear. Remove the interface cover before connecting any cables.

Connecting to Video Equipment

To project images from DVD players or VHS video and so on, connect to the projector using one of the
following methods.
When using an HDMI cable
Fix the HDMI cable in place using the HDMI cable clamp.
When using a video cable
When using a component video cable
c
•
The cable differs depending on the output signal from the connected video equipment.
•
Some types of video equipment are capable of outputting different types of signals. Check the user's
guide supplied with the video equipment to confirm which signals can be output.
p.21
s
p.21
s
19