Extended Menu - Epson EH-TW9100W User Manual

Configuration Menu
Function
Reset Yes, No
*
Only EH-TW9100W/EH-TW8100W is displayed.

Extended menu

Function
Operation Direct Power On
Sleep Mode
Illumination
Trigger Out
High Altitude Mode On, Off
Menu/Settings
Menu/Settings
On, Off
Off, 5min., 10min.,
30min.
On, Off
*1
On, Off
Off, Power, Ana-
*2
morphic Wide
75
Explanation
Resets all Settings to their default
settings.
Explanation
You can set up the projector so that projection
starts as soon as it is turned on without any but-
ton operations.
Note that when this is set to On, projection starts
if power is restored after a blackout or other
power outage and the main power switch is
turned on.
If the set time is exceeded and no signal is input,
the projector is automatically turned off and en-
ters standby mode. When set to Off,the projector
never enters sleep mode. When in standby
mode, press the button on the remote con-
trol or the button on the control panel to
start projection.
Set this to Off if the light from the indicators on
the control panel bother you when watching a
movie in a dark room.
Set the Trigger Out function to communicate the
projector's power on status and so on to external
devices.
When set to Off, no voltage is output from the
Trigger out port.
When set to On or Power, voltage is output from
the Trigger out port when the projector is on.
For Anamorphic Wide, when the projector is on
and Aspect is set to Anamorphic Wide or Horiz.
Squeeze, voltage is output from the Trigger
out port.
If you change this setting, the new setting will
take effect the next time you turn the projector
on.
Set this to On if you are using the projector above
an altitude of 1500 meters.