Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MTX Thunder
Summary of Contents for MTX Thunder
- Page 1 POWER AMPLIFIER OWNER’S MANUAL...
-
Page 2: Features
POWER AMPLIFIER OWNER’S MANUAL Introduction Features • Thunder Amplifiers are Covered by 1 or More of • 12dB/Octave Stereo High Pass, 24dB/Octave CONGRATULATIONS... HOW TO USE THIS MANUAL the Following United States of America Patents: Mono Low Pass Crossover #5,598,325, #5,631,608, #5,783,970. -
Page 3: Installation
Troubleshooting Guide 6. Connect a Remote Turn-on wire from your source unit to your Thunder amplifier’s REM terminal (14 or 16 gauge wire). If your source unit does not have a dedicated Remote Turn-on lead, you may connect to the Read this if you wanna be a do-it-yourselfer or give us a call at 800-CALLMTX. - Page 4 Available crossover frequencies are 40-200Hz. 6. Thunder EQ – This equalization circuit is used to enhance the low frequency response of the vehicle’s inte- rior. With up to 18 dB of boost and centered at 40Hz, the Bass EQ can be adjusted to meet your own personal taste.
-
Page 5: Output Panel Layout
Thunder1004 – 1/0 Gauge only 3. Ground Terminal – A good quality ground is required for your Thunder Amplifier to operate at peak performance. A short length of cable the same gauge as your power cable should be used to attach the ground terminal directly to the chassis of the car. -
Page 6: Warranty
MTX dealer, and one year if installed by the consumer. This warranty is limited to the original retail purchaser of the product. - Page 7 4545 East Baseline Road Phoenix, AZ 85042 602-438-4545 800-CALL MTX mtx.com © 2002 MTX. All rights reserved. MTX and Thunder are trademarks of MTX. MTX001343 RevB 10/02 NDM251 Due to continual product development, all specifications are subject to change without notice.
Need help?
Do you have a question about the Thunder and is the answer not in the manual?
Questions and answers