MTX THUNDER Series Manual
Hide thumbs
Also See for THUNDER Series:
- User manual ,
- Owner's manual (16 pages) ,
- Owner's manual (33 pages)
Related Manuals for MTX THUNDER Series
Summary of Contents for MTX THUNDER Series
- Page 1 THUNDER SERIES AMPLIFIERS TH750.1 / TH1500.1 / TH2500.1 TH400.4 / TH800.4 TH1400.5 / TH900.6...
-
Page 2: Table Of Contents
INTRODUCTION TABLE OF CONTENTS Congratulations on the purchase of your new MTX 2. Introduction / Safety gear. For over 50 years MTX remains an American 3. Features / Package Contents family-owned manufacturer full of passionate 4. Control Functions enthusiasts just like you. Thank you for counting on 8. -
Page 3: Features / Package Contents
FEATURES PACKAGE CONTENTS • Reliable and Efficient Class-D Circuit Design • (1) THUNDER Series Amplifier • Small Size Footprint for Easy Installation • (1) EBC Remote Knob (Not Included with TH400.4, TH800.4, and TH900.6 Models) • Surface Mount Component Technology •... -
Page 4: Control Functions
8. External Bass Control (EBC) Port (TH750.1 / TH1500.1 / TH2500.1 / TH1400.5) When the short circuit or overload protection is This port connects to the included MTX EBC to activated, the Power LED will remain illuminated remotely control the output level of the amplifier red, but the output of the amplifier channel (sub channel only on TH1400.5). - Page 5 16. Phase Switch (TH750.1 / TH1500.1 / TH2500.1 / TH1400.5) - This switch allows you to invert the phase of the amplifier outputs. In phase (0°) is default, but out of phase (180°) can improve bass response in some applications. MTX.COM...
- Page 6 13 14 15 MTX.COM...
- Page 7 13 14 15 MTX.COM...
-
Page 8: Installation
INSTALLATION MTX recommends your new THUNDER Series 5. Install a circuit breaker or fuse holder on amplifier be installed by an Authorized MTX Dealer. the power cable within 18" of the battery. This Any deviation from specified installation instructions effectively lowers the risk of severe damage... - Page 9 G. Repeat Steps A through F for each pair of Speakers, Coaxials, & Component Systems. amplifier channels and / or mono channel. • LPF: Low Pass Filter is used for Subwoofers. • FULL: Defeats internal crossovers for full bandwidth audio signal. MTX.COM...
- Page 10 2. Align the top cover between the end caps and slide up into place, making sure that it remains flat, and the bottom edge engages the heatsink. Replace the (2) control cover screws using supplied Allen wrench. MTX.COM...
-
Page 11: Wiring
WIRING TH400.4 TH800.4 Speakers 2Ω - 8Ω – – – – Speakers 2Ω - 8Ω Speaker 4Ω - 8Ω Bridged Installation – – Speaker 4Ω - 8Ω MTX.COM... - Page 12 WIRING TH1400.5 Speakers Subwoofer 2Ω - 8Ω 1Ω - 8Ω – – – – – Speakers 2Ω - 8Ω Speaker Subwoofer 4Ω - 8Ω 1Ω - 8Ω Bridged Installation – – – Speaker 4Ω - 8Ω MTX.COM...
- Page 13 WIRING TH900.6 Speakers 2Ω - 8Ω + – – + – + – – + – Speakers 2Ω - 8Ω Speakers 4Ω - 8Ω Bridged Installation – – – Speaker 4Ω - 8Ω MTX.COM...
- Page 14 WIRING TH750.1 TH1500.1 TH2500.1 + – Subwoofer 1Ω - 8Ω MTX.COM...
-
Page 15: Dimensions
TH1500.1 (50mm) (297mm) (176mm) 2" " 7" TH2500.1 (50mm) (367mm) (176mm) 2" " 7" TH400.4 (50mm) (207mm) (176mm) 2" " 7" TH800.4 (50mm) (247mm) (176mm) 2" " 7" TH1400.5 (50mm) (367mm) (176mm) 2" " 7" TH900.6 (50mm) (307mm) (176mm) MTX.COM... -
Page 16: Specifications
0dB - 12dB Subsonic Filter 10Hz - 55Hz 10Hz - 55Hz 10Hz - 55Hz EBC Remote Knob Recommended 80A - 100A 150A - 200A 250A - 300A External Fuse Rating Recommended 4 AWG 4 AWG 1/0 AWG Power / Ground Cable MTX.COM... - Page 17 20Hz - 20KHz 20Hz - 20KHz 20Hz - 250Hz (Sub) 0dB - 12dB (Sub) 10Hz - 55Hz (Sub) 40A - 60A 60A - 80A 150A - 200A 100A - 150A 8 AWG or 4 AWG 4 AWG 1/0 AWG 4 AWG MTX.COM...
- Page 18 NOTES MTX.COM...
-
Page 19: Warranty
We’re here to help! If you experience an issue with any of our products, please contact our customer service technical line at 1-800-CALL-MTX to help troubleshoot your issue. If after speaking with our technical experts it is determined that your product is defective, the technician will provide you with a Return Authorization number and all relevant details you’ll need to process your claim quickly. -
Page 20: Let's Get Social
Like, Follow, & Subscribe © 2024 MiTek Corporation. All rights reserved. MTX is a trademark of MiTek Corporation. All other trademarks are property of their respective owners. Designed and Engineered in the U.S.A. Due to continual product development, all specifications are subject to change without notice.
Need help?
Do you have a question about the THUNDER Series and is the answer not in the manual?
Questions and answers