Technical Specifications - CyberPower CP900EPFCLCD User Manual

Ups system

Hide thumbs Also See for CP900EPFCLCD:

User manual (11 pages)

Technical specification (2 pages)

Quick start manual (2 pages)

Table Of Contents

Table of Contents

(Note: The OUTPUT meter shows the status of the battery backup outlets in terms of load,

frequency, and voltage.)

11. INPUT meter: This meter measures the AC voltage that the UPS system is receiving from the

utility wall outlet. The UPS is designed, through the use of automatic voltage regulation, to

continuously supply connected equipment with stable, 220/230 output voltage. In the event of a

complete power loss, severe brownout, or over-voltage, the UPS relies on its internal battery to

supply consistent 220/230 output voltage. The INPUT meter can be used as a diagnostic tool to

identify poor-quality input power.

12. EVENT: This meter records the number of power outages.

13. MUTE: This icon appears whenever the UPS is in silent mode. The buzzer does not beep during

silent mode until the battery reaches low capacity.

14. AVR (Automatic Voltage Regulation): This icon appears whenever your UPS is automatically

correcting low AC line voltage without using battery power. This is a normal, automatic operation

of your UPS, and no action is required on your part.

For more information about functions setup, please refer to the Function Setup Guide.

Model

Capacity (VA)

Input

Frequency Range

AVR Function

Output

On Battery Output

Voltage

On Battery Output

Frequency

Overload Protection

Surge Protection

Lightning / Surge

Protection

Network/ Phone/ Fax/

Modem Protection

Operating Temperature

Physical

Total # of UPS outlets

Maximum

Dimensions(LxWxH)

Weight (kg)

Battery