IBM THINKVISION MONITOR L150 User Manual page 20

The image is already
optimized for many display
modes; however the user controls
can be used to adjust the image to
your liking.
18
Operation
• Press the OSD Enter button to display the main OSD menu.
• Use the Arrow buttons to move among the icons. Select an icon and press
OSD Enter to access that function. If there is a sub-menu, you can move
between options using the Arrow buttons, then press OSD Enter
that function. Use the Arrow buttons to make adjustments. Press the
button to save.
• Press the Exit (
and exit from the OSD.
OSD Lock / Unlock
•
This feature allows you to secure the current control settings, so that they
cannot be changed, while allowing you to adjust the brightness and contrast.
You can unlock the OSD controls at any time using the same procedure
•
Push and hold the OSD Enter (
When unlocked, a "Menu is Unlocked" message will be displayed. When
locked, a "Menu is Locked" message will be displayed.
) button to move backwards through the sub-menus
) button for 10 seconds to Lock or to Unlock.
to select