Installing The Qlogic Sansurfer Pro Utility; Sansurfer Pro Utility Installation And System Requirements; Installing On Windows And Novell Netware Platforms - IBM System Storage DS4000 FC Installation And User Manual

Installing the QLogic SANsurfer Pro Utility

The installation files for the QLogic SANsurfer Pro Utility, for Microsoft Windows
2000 and Server 2003, Novell NetWare, or Linux platforms, can be found in either
the SANSurfer_FAStT-MSJ folder on the DS4000 Storage Manager host software
CD or in the downloadable Web package at the DS4000 Technical Support Web
site, at www.ibm.com/servers/storage/support/disk/.

SANSurfer Pro Utility installation and system requirements

The SANSurfer Pro Utility installation and system requirements are found in the
README files that come with the utility program.

Installing on Windows and Novell NetWare platforms

Note: If SANSurfer is already installed, uninstall it prior to installing a new copy.
To perform the SANSurfer Pro Utility installation Windows and Novell NetWare
platforms, you must execute four steps.
1. Double-click on the executable installation file, which will have a name similar to
2. At the "Choose Product Features" screen, select either option a. or b. of the two
3. Choose the "Destination Location." (The default is: <Windows system
4. If you are installing the SANSurfer NetWare Agent, the installation will display a
10
IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User's Guide
sansurfer2.0.30b62_windows_install-i.exe, for example; then follow the
on-screen instructions.
preconfigured installation sets listed below; or, select "Custom" to define an
installation set.
a. ALL GUIs and ALL Agents to install the SANsurfer FC HBA Manager, the
SANsurfer FC HBA Manager, and SANsurfer Switch Manager GUIs,
including the FC and iSCSI (Windows, Linux, or Solaris) agents,
or
b. SANsurfer FC HBA Manager to install only the SANsurfer FC HBA Manager
GUI.
Notes:
1) To install the Novell NetWare agent, you must select "Custom" and then
select the "SANsurfer FC Windows NT
you are presented with the "Choose Product Component" window.
2) Do not select the following installation sets unless they are applicable to
your configuration. These functions are not supported by the DS4000
storage subsystem product support.
v SANsurfer Switch Manager GUI, to install only the SANsurfer Switch
Manager GUI. This option is for managing QLogic switches only.
v iSCSI GUI and Agent, to install the SANsurfer iSCSI HBA Manager GUI,
including the iSCSI (Windows, Linux, or Solaris) agent.
v SANsurfer iSCSI HBA Manager, to install only the SANsurfer iSCSI HBA
Manager (GUI, not the iSCSI (Windows, Linux, or Solaris) agent).
Click "Next."
drive>:\Program Files\QLogic Corporation\SANsurfer.)
"Choose Destination Location" screen. Use the "Browse" button to point to the
\SYSTEM directory on the NetWare SYS volume. The installer will automatically
save the agent in the appropriate NetWare volume.
®
4/2000/2003 Agent" box, when