IBM System Storage DS4000 FC Installation And User Manual page 60

Table 7. DS4000 Storage Manager alternate keyboard operations (continued)
Short cut
Alt+ underlined letter
Ctrl+F1
Spacebar
Ctrl+Spacebar
(Contiguous/Non-contiguous)
AMW Logical/Physical View
End, Page Down
Esc
Home, Page Up
Shift+Tab
Ctrl+Tab
Tab
Down arrow
Left arrow
Right arrow
Up arrow
34
IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User's Guide
Action
Access menu items, buttons, and other interface
components by using the keys associated with the
underlined letters.
For the menu options, select the Alt + underlined letter
combination to access a main menu, and then select the
underlined letter to access the individual menu item.
For other interface components, use the Alt + underlined
letter combination.
Display or conceal a tool tip when keyboard focus is on
the toolbar.
Select an item or activate a hyperlink.
Select multiple drives in the Physical View.
To select multiple drives, select one drive by pressing
Spacebar, and then press Tab to switch focus to the next
drive you want to select; press Ctrl+Spacebar to select
the drive.
If you press Spacebar alone when multiple drives are
selected then all selections are removed.
Use the Ctrl+Spacebar combination to deselect a drive
when multiple drives are selected.
This behavior is the same for contiguous and
non-contiguous selection of drives.
Move keyboard focus to the last item in the list.
Close the current dialog (does not require keyboard
focus).
Move keyboard focus to the first item in the list.
Move keyboard focus through components in the reverse
direction.
Move keyboard focus from a table to the next user
interface component.
Navigate keyboard focus between components or select
a hyperlink.
Move keyboard focus down one item in the list.
Move keyboard focus to the left.
Move keyboard focus to the right.
Move keyboard focus up one item in the list.