Table of Contents
Advertisement
Preparation
Power supply
∫ About batteries that you can use with this unit
The battery that can be used with this unit is CGA-D54s.
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not liable
for any accident or failure occurring as a result of use of a counterfeit battery pack.
To ensure that safe products are used we would recommend that a genuine
Panasonic battery pack is used.
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery fully
before using this unit for the first time.
Important:
≥ Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC.
(The battery temperature should also be the same.)
≥ Insert the plugs as far as they will go.
1
Connect the AC cable to the battery charger and the AC outlet.
14
VQT3V01 (ENG)
Charging lamp [CHARGE] A
Lights up:
Charging (Battery charging time: l 16)
Goes off:
Charging completed
Flashing:
Be sure to connect the unit correctly
Power lamp B
≥ This will light up when the AC cable is
connected.
Advertisement
Table of Contents
