Table of Contents
Advertisement
∫ Adjust the length of the grip belt so that it fits your hand.
∫ Attaching the eye cup
Attach by aligning the notch of the eye cup attachment part with the protrusion at the inside of
the eye cup.
∫ Attaching the lens cap
Protect the lens surface with the lens cap while the unit is not used.
Attach or remove it by pinching on it.
1, 2 Flip the belt cover and the belt.
Adjust the length.
3
4, 5 Replace the belt.
A Notch
B Protrusion
13
(ENG) VQT3V01
Advertisement
Table of Contents
