Air Live POE-200HD User Manual
  1. Manuals
  2. Brands
  3. Air Live Manuals
  4. Security Camera
  5. POE-200HD
  6. User manual

Air Live POE-200HD User Manual

H.264 1.3 megapixel poe dome
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
POE-200HD
H.264 1.3 MegaPixel POE Dome
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Air Live POE-200HD

Summary of Contents for Air Live POE-200HD

  • Page 1 POE-200HD H.264 1.3 MegaPixel POE Dome User’s Manual...
  • Page 2 Copyright and Disclaimer Copyright & Disclaimer No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of OvisLink Corp. OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user’s guide.

  • Page 3: Table Of Contents

    5.1.8 Object Detection : Setup Object detection ..........42 5.1.9 Event Server : Setup FTP/TCP/HTTP/SAMBA server configuration..43 5.1.10 Event Schedule: Configure the event schedule ........47 Appendix A: Alarm I/O Connector ..............51 Appendix B: Frequently Asked Questions ..........53 Appendix C: PING IP Address ..............57 AirLive POE-200HD User’s Manual...
  • Page 4 Appendix D: Bandwidth Estimation ............58 Appendix E: Specifications.................59 Appendix F: Configure Port Forwarding Manually ........61 Appendix G: DDNS Application ..............64 Appendix H: Power Line Frequency............71 Appendix I: 3GPP..................72 Appendix J: Enable UPnP of Windows XP ..........73 AirLive POE-200HD User’s Manual...

  • Page 5: Overview

    1. Overview Overview This user’s guide explains how to operate this camera from a computer. User should read this manual completely and carefully before you operate the device. 1.1 Introduction This camera is an inexpensive and fully scalable surveillance device. Because the Network Cameras can be plugged into your existing local area network (LAN), you will potentially save thousands of dollars from unnecessary cabling.

  • Page 6: Minimum System Requirements

    Microsoft Internet Explorer 6.0 or later Microsoft Media Player 11.0 or later (to playback recorded file) VGA Monitor resolution 1280 x 1024 or higher Pentium-4 2.0 GHz or higher Memory Size: 512MB or more Windows XP, Vista AirLive POE-200HD User’s Manual...

  • Page 7: Package Contents

    If any of the above items are missing, please contact your dealer immediately. Note: Using a power supply with a different voltage than the one included with the Network Camera will cause damage and void the warranty for this product. AirLive POE-200HD User’s Manual...

  • Page 8: Connections

    This LED will be flashing while network accessing via Ethernet. Power & Wireless LED (orange color) This LED is used to indicate whether DC power is on or not. In addition, this LED will be flashing while the wireless accessing of the Camera. irLive POE-200HD User’s Manual...
  • Page 9 5. MIC in (audio in) Connect a microphone to the network camera. 6. Line out (audio out) Connect a loud speaker to the network camera. This function is for voice alerting and two-way audio. AirLive POE-200HD User’s Manual...

  • Page 10: Hardware Installation

    5. Connect the LAN cable to Ethernet’s switch or hub and the DC-Jack to the power source. And connect the other cables and connectors if necessary. 6. Done irLive POE-200HD User’s Manual...

  • Page 11: Preparation

    Camera’s IP address and set up related parameter in a Camera. Search When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to search Network Cameras on the LAN. The existed devices will be listed as below. AirLive POE-200HD User’s Manual...
  • Page 12 LAN button. Relative settings will be carried out as below. You could modify the relative settings of the selected device. Click “<<” button will quit the LAN setting procedure and click “>>” button will move to next page as below. irLive POE-200HD User’s Manual...
  • Page 13 After keying in new username and password, click “Submit” button to perform your setting accordingly. Click “<<” button will go back to previous page. Wireless This model does not support wireless function. Therefore, IPWizard II disables this function automatically. AirLive POE-200HD User’s Manual...

  • Page 14: Using Upnp Of Windows® Xp Or Vista

    However, if your NAT router supports UPnP feature, it can be very easy to achieve NAT traversal automatically. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the camera. irLive POE-200HD User’s Manual...

  • Page 15: Access The Device From The Internet Explorer For The First Time

    Access the device from the Internet Explorer for the first time Start the web browser on the computer and type the IP address of the Network Camera you want to monitor as below: The Login Window of the Camera is prompted: AirLive POE-200HD User’s Manual...
  • Page 16 Camera as an ordinary User, “Setting” function will be not accessible. ogging in as an Administrator If you log in the Network Ca mera as the Administrator, you can perform all the settings rovided within the device. irLive POE-200HD User’s Manual...

  • Page 17: Operating The Network Camera

    The Network Camera support multi-profile for both MEPG4 and JPEG simultaneously. User can chose the proper and/or preferred profile here. Streaming Protocol User can select proper streaming protocol according to networking environment. Language The device could provide multiple languages to meet customer’s requirement. AirLive POE-200HD User’s Manual...
  • Page 18 Click the icon will hide the PTZ control function. Camera direction: Control camera up/down/left/right and home position. Camera speed: Choose the speed of Pan and Tilt. Preset: Add/Update the preset positions or go to one of these positions. irLive POE-200HD User’s Manual...
  • Page 19 On the ActiveX control icon, click the LeftMouseButton, then a menu pop-up. This menu provides features that are unique to the ActiveX control. These features include: • “Digital Zoom”, • “Record”, • “Snapshot”, • “Voice”, • “Statistics”, • “About” AirLive POE-200HD User’s Manual...
  • Page 20 After stop recording, list the files, this file is named as Video_yyyymmddhhmmss.avi The ASF files can be display by the standard Windows Media Player, but it needs the DixectX 9.0 or later version to be installed. irLive POE-200HD User’s Manual...
  • Page 21 Voice Click Volume to activate this function. There are two control bars for speaker and microphone volume respectively. Scroll these control bars to adjust the audio attribute. Check the volume mute will mute the speaker output. AirLive POE-200HD User’s Manual...
  • Page 22 Click Statistics to activate this function. A window will be popup to show the statistics information of the streaming status. Note that this information is the statistics between the device and your local PC. About Click About to show this ActiveX information. irLive POE-200HD User’s Manual...

  • Page 23: Administrating The Device

    Audio Configure audio parameters User Setup user name, password and login privilege E-Mail Setup E-Mail configuration Object Detection Setup Object detection Event Server Setup FTP/TCP/HTTP server for event Event Schedule Configure the schedule while event triggered AirLive POE-200HD User’s Manual...

  • Page 24: Network

    Enable this checked box when a DHCP server is installed on the network and provide DNS service. Primary DNS and Secondary DNS: If you do not select Obtain DNS from DHCP, then you need to enter these parameters manually. irLive POE-200HD User’s Manual...
  • Page 25 As to xDSL environment, most of the users will use dynamic IP addresses. If users want to set up a web or a FTP server, then the Dynamic Domain Name Server is necessary. AirLive POE-200HD User’s Manual...
  • Page 26 A standard builds on Ethernet and Point-to-Point network protocol. It allows your device with xDSL or cable connects with broadband network directly, then your device can dial up and get a dynamic IP address. For more PPPoE and Internet configuration, please consult your dealer or ISP. irLive POE-200HD User’s Manual...
  • Page 27 Type the password for the PPPoE service which is provided by the ISP. IP address, Subnet mask, and Gateway (read only): Shows the IP information got from PPPoE server site. Status: Shows the Status of PPPoE connection. AirLive POE-200HD User’s Manual...
  • Page 28 UPnP enabled Video Server. If your operating system is UPnP enabled, the device will automatically be detected and a new icon will be added to “My Network Places.” If you do ot want to use the UPnP functionality, it can be disabled. irLive POE-200HD User’s Manual...
  • Page 29 Show the IP address and port for WAN access through Internet. If NAT tra versal is onfigured successfully, user can use this IP address and port to access this device. The xternal IP address is not shown in case NAT traversal function is failed. AirLive POE-200HD User’s Manual...
  • Page 30 If enable this function, then the “Send to“ and “Subject” fields need to be filled. end To: Type the r eceiver’s e-mail address. This address is used for reply mail. ubject: ype the subject/title of the E-mail. irLive POE-200HD User’s Manual...
  • Page 31 If enable this function, then the fields below need to be filled. URL: Type the server name or the IP address of the HTTP server HTTP Login name: Type the user name for the HTTP server. AirLive POE-200HD User’s Manual...

  • Page 32: Camera : Adjust Camera Parameters

    User can set specific parameters to HTTP server. Message: The message will be sent to HTTP server. 5.1.2 Camera : Adjust Camera parameters Use this menu to set the functions of the camera parameters of the device. Picture irLive POE-200HD User’s Manual...
  • Page 33 Large value will contrast camera heavily. Night Mode: User can turn Auto or Off of the night mode. This function is very useful under low illumination environment. De-Noise: De-Noise can remove or lower unwanted noise and preserve fine details and edges AirLive POE-200HD User’s Manual...
  • Page 34 Baud rate: This is the communication speed between network module and P/T scanner. Note If need to change these parameters, user needs to check and set value properly for both, network module and P/T scanner. irLive POE-200HD User’s Manual...
  • Page 35 This page provides the edit tool to modify or delete the “Preset Setting” item by item. Tour Setting Up to 128 positions can be preset, and the camera can be programming to move to the preset position sequentially. AirLive POE-200HD User’s Manual...

  • Page 36: System : Configure And Maintain System

    Type a period of time during which the camera is to stay at each preset point, between 0 to 36000 seconds. To use the camera tour function, user must preset some camera positions first. 5.1.3 System : Configure and maintain system Use this menu to perform the principal settings of the device. System irLive POE-200HD User’s Manual...
  • Page 37 NTP Server: Type the host name or IP address or domain name of the NTP server. NTP sync. Interval: Select an interval between 1 and 23 hours at which you want to adjust the device’s time referring to NTP server Time zone: AirLive POE-200HD User’s Manual...
  • Page 38 Restore Setting: Click the “Browse” button to locate the saved backup file and then click the “Restore Setting” button. The settings will be restored to the previous configuration. Firmware Upgrade: irLive POE-200HD User’s Manual...
  • Page 39 Furthermore, the firmware upgrade procedure always is risk and do not try to upgrade new firmware if it’s not necessary. System Restart: The device is restarted without changing any of the network settings. It means the IP address of the device will not change after firmware upgrade. AirLive POE-200HD User’s Manual...

  • Page 40: Video: Configure Profile

    For VBR, user should choose the quality level to set the video quality rather than bit rate. The quality level is between 1 and 100. The higher value can reach the better quality but of course will consume higher bandwidth. irLive POE-200HD User’s Manual...
  • Page 41 For VBR, user should choose the quality level to set the video quality rather than bit rate. The quality level is between 1 and 100. The higher value can reach the better quality but of course will consume higher bandwidth. AirLive POE-200HD User’s Manual...
  • Page 42 Defines the targeted frame rate of this profile. For example, set the frame rate to 15 fps, then the image will be updated for 15 frames per second as possible. User need to set reasonable max frame rate versus video quality under the limited bandwidth. irLive POE-200HD User’s Manual...

  • Page 43: Audio: Audio Parameters

    5. Administrating the Device 5.1.5 Audio : Audio parameters Audio: To enable or disable audio function Audio Mode: To select Simplex or Full duplex (2-way audio) mode Input Gain: To adjust gain of input audio AirLive POE-200HD User’s Manual...

  • Page 44: User : Manage User Name, Password And Login Privilege

    You may setup SMTP mail parameters for further operation of Event Schedule. That’s, if users want to send the alarm message out, it will need to configure parameters here and also add at least one event schedule to enable event triggering. irLive POE-200HD User’s Manual...
  • Page 45 Type the password for the SMTP server if Authentication is Enable. E-mail To: Type the receiver’s e-mail address. E-mail From: Type the sender’s E-mail address. This address is used for reply e-mails. E-mail Subject: Type the subject/title of the e-mail. AirLive POE-200HD User’s Manual...

  • Page 46: Object Detection : Setup Object Detection

    Defines the object size of motion detection. The higher object size will only larger objects trigger motion detection. The lower object size will even small objects trigger motion detection too. Generally speaking, the smaller size will be easier to trigger event. irLive POE-200HD User’s Manual...

  • Page 47: Event Server : Setup Ftp/Tcp/Http/Samba Server Configuration

    Type the server name or the IP address of the FTP server. Test: Check the FTP server whether this account is available or not. FTP Login name: Type the user name for the FTP server. FTP Login Password: AirLive POE-200HD User’s Manual...
  • Page 48 TCP server setting. TCP Server: Type the server name or the IP address of the TCP server. TCP Port: Set port number of TCP server. HTTP Server The device also can send event message to specified HTTP server. irLive POE-200HD User’s Manual...
  • Page 49 Type the password for the HTTP server. Proxy Address: Type the server name or the IP address of the HTTP Proxy. Proxy Login name: Type the user name for the HTTP Proxy. Proxy Login Password: Type the password for the HTTP Proxy. AirLive POE-200HD User’s Manual...
  • Page 50 Check the SAMBA server whether this account is available or not. SAMBA Login name: Type the user name for the SAMBA server. SAMBA Login Password: Type the password for the SAMBA server. SAMBA Path: Set working directory path of SAMBA server. irLive POE-200HD User’s Manual...

  • Page 51: Event Schedule: Configure The Event Schedule

    Name of the Event or Schedule. Enable: Enable or disable this Event or Schedule. Type: Event trigger or Schedule trigger. Enable Time: Define the feasible time slot. Trigger by: Select the triggered sources. Action: Define the actions once event triggered. AirLive POE-200HD User’s Manual...
  • Page 52 Trigger by : Motion Area (Added in Object Detection page) Action : Send e-mail (Add in E-Mail page) To email address: You need to input the receiver email address. Subject: You could specify the email subject. iii. Message: You could specify the email content. irLive POE-200HD User’s Manual...
  • Page 53 Enable time: Select Monday to Friday, and set start time from 18:00 and keep work in 6 hous. Trigger by : You do not need to choose it, because this will be triggered every minute Action : Voice Alert AirLive POE-200HD User’s Manual...
  • Page 54 User can choose the type of record file for event or schedule application. Record File Type: Choose AVI or JPEG file format. Record File Prefix: Define the prefix of recorded filename. JPEG Picture Numbers: Define the picture numbers of JPEG to be sent out. irLive POE-200HD User’s Manual...

  • Page 55: Appendix A: Alarm I/O Connector

    RS485 data - Green/White Digital signal input Orange/White Digital signal output User can refer to the schematic below to make a proper connection between I/O connector and external sensor and output device. Explanation of External I/O Circuit Diagram: AirLive POE-200HD User’s Manual...
  • Page 56 REQUIRE LARGE AMOUNTS OF CURRENT. IN SOME CASES, A CUSTOM INTERFACE CIRCUIT (CUSTOMER PROVIDED) MAY HAVE TO BE USED. SERIOUS DAMAGE TO NETWORK CAMERA MAY RESULT IF A DEVICE IS CONNECTED TO THE EXTERNAL I/O THAT EXCEEDS ITS ELECTRICAL CAPABILITY. irLive POE-200HD User’s Manual...

  • Page 57: Appendix B: Frequently Asked Questions

    • If IP address is not assigned to the PC which running IPWizard II program, then IPWizard II program cannot find device. Make sure that IP address is assigned to the PC properly. • Antivirus software on the PC might interfere with the setup program. AirLive POE-200HD User’s Manual...
  • Page 58 • Some routers reject the global IP address to access the Network Camera on the same LAN. Access with the private IP address and correct port number of Network Camera. • When you use DDNS, you need to set Default Gateway and DNS server address. irLive POE-200HD User’s Manual...
  • Page 59 • Audio will consume 32 kbps. Disable audio to improve video. Your Internet connection may not have enough bandwidth to support streaming audio from the device. Image Transfer on e-mail • Default Gateway and DNS server address should be set up correctly. AirLive POE-200HD User’s Manual...
  • Page 60 White-light LED on. Miscellaneous Can not play the Have installed Microsoft®’s DirectX 9.0 or later and use the Windows recorded ASF file Media Player 11.0 or later to play the AVI filed recorded by the Device. irLive POE-200HD User’s Manual...

  • Page 61: Appendix C: Ping Ip Address

    The replies, as illustrated below, will provide an explanation to the problem. If you want to detect any other devices conflicts with the IP address of Network Camera, also can utilize the PING command but you must disconnect the Network Camera from the network first. AirLive POE-200HD User’s Manual...

  • Page 62: Appendix D: Bandwidth Estimation

    128 kbps. Thus, you may not be able to receive good quality video while also streaming audio on a 128 kbps or lower connection. Even though the upload speed is more than 128kbps, for optimal video performance, disabling audio streaming will get better video performance. irLive POE-200HD User’s Manual...

  • Page 63: Appendix E: Specifications

    Bonjour, UPnP, RTSP, RTP, RTCP, PPPoE, 3GPP, ICMP, IGMP, SAMBA Security Password protection, IP address filtering, user access log 20 simultaneous unicast users Users Unlimited users using multicast Ethernet 10/100M auto negotiation System Integration Application Open API for software integration AirLive POE-200HD User’s Manual...
  • Page 64 Browser IE 6.0 or latter / Firefox 2.0 or later Cell Phone With 3GPP player Video Player VLC, Quick Time, Real Player Software Search & Installation IPWizard II Bundled NVR Program Cam Pro Express 64 Channel irLive POE-200HD User’s Manual...

  • Page 65: Appendix F: Configure Port Forwarding Manually

    Reset IP address at next boot button at the top of the screen after modifying the IP address. Failure to do so will reset the IP address when you restart your computer. AirLive POE-200HD User’s Manual...
  • Page 66 Internet. This is accomplished using the Virtual Server function on the router. The Virtual Server ports used by the camera must be opened through the router for remote access to your camera. Virtual Server is accessed by clicking on the Advanced tab of the router screen. irLive POE-200HD User’s Manual...
  • Page 67 Enter valid ports in the Virtual Server section of your router. Please make sure to check the box on this line to enable settings. Then the device can be access from WAN by the router’s WAN IP Address. By now, you have finished your entire PC configuration for this device. AirLive POE-200HD User’s Manual...

  • Page 68: Appendix G: Ddns Application

    DDNS and PPPoE of the Networked Device in order to let the outside administrator be able to access through internet. 3. Application Steps—DDNS & Domain Name (1). Visit the following web site: http://www.dyndns.org/ (2). Click “Account” irLive POE-200HD User’s Manual...
  • Page 69 (3). After the columns show up at the left side, click “Create Account” (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input information and finish creating an account AirLive POE-200HD User’s Manual...
  • Page 70 Appendix G Click these two options irLive POE-200HD User’s Manual...
  • Page 71 Account Information“. Click the hyperlink address to confirm the DDNS service tha you just applied. Then DDNS you applied activated. Click to confirm ). Enter the web page http://www.dyndns.org/ again. Input your username and password that you just applied to login administration interface of DDNS server AirLive POE-200HD User’s Manual...
  • Page 72 Input your account (7). If the correct username and password are input, you can see the following picture at the top-right of the login page. (8). Click the “Services”. (9). Click the “ Dynamic DNS ”. irLive POE-200HD User’s Manual...
  • Page 73 (Pink No.1) Then we pick a domain that is easy to remember. (Pink No.2) The 3 step is to click “Offline Hostname” from Service Type. (Pink No.3) Finally, click the “Create Host” to submit the domain name information and finish DDNS application. (Pink No.4) AirLive POE-200HD User’s Manual...
  • Page 74 DDNS and PPPoE after the application of DDNS service. Please check the user manual to access the DDNS and PPPoE pages. After saving the modification, restart the device. Then the external users could browse the Networked Device by the input of their domain name. irLive POE-200HD User’s Manual...

  • Page 75: Appendix H: Power Line Frequency

    50 Hz *Outlets typically controlled by adjacent switch. United Kingdom 230V* 50 Hz Though nominal voltage has been officially changed to 230V, 240V is within tolerances and commonly found. United States of America 120V 60 Hz AirLive POE-200HD User’s Manual...

  • Page 76: Appendix I: 3Gpp

    2. Use the following URL to access: rtsp://host/mpeg4/media.3gp Where host is the host name or IP address of the camera. Compatible 3G mobile phone: Please contact your dealer to get the approved list of compatible 3G phone. irLive POE-200HD User’s Manual...

  • Page 77: Appendix J: Enable Upnp Of Windows Xp

    Appendix J Appendix J: Enable UPnP of Windows XP Use the following steps to enable UPnP settings only if your operating system of PC is running Windows XP. Go to Start > Settings Click Control Panel AirLive POE-200HD User’s Manual...
  • Page 78 Appendix J Click Add or Remove Programs Click Add/Remove Windows Components The following screen will appear: irLive POE-200HD User’s Manual...
  • Page 79 Appendix J Select Networking Services Click Details Select Universal Plug and Play Click Ok AirLive POE-200HD User’s Manual...
  • Page 80 Appendix J Click Next Please wait while Setup configures the components. irLive POE-200HD User’s Manual...
  • Page 81 Appendix J Click Finish AirLive POE-200HD User’s Manual...

Table of Contents