Daytime Running Lamps - BMW Z4 sDrive30i Owner's Manual

1. Switch on the ignition, refer to page 41.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3. Press button 2.
Lightly push button 1 in the turn indicator
4.
lever down repeatedly until the symbol
appears in the display.
5. Press button 2.
Use button 1 to select one of the following:
6.
>
The function is deactivated.
> ...
Select the corresponding duration, e.g.
40 seconds.
7. Press button 2.
The setting is stored for the remote control
currently in use.

Daytime running lamps

The daytime running lamps light up in switch
position 0, 1 and 3. They are less powerful than
the low beams.
Online Edition for Part no. 01 41 2 602 118 - © 01/09 BMW AG
Activating/deactivating the daytime
running lamps
For operating principle refer to page 58.
1. Switch on the ignition, refer to page 41.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3. Press button 2.
4. Lightly push button 1 in the turn indicator
lever down repeatedly until the symbol
appears in the display.
5. Press button 2.
6. Use button 1 to select one of the following:
>
Daytime running lamps activated.
>
Daytime running lamps deactivated.
7. Press button 2.
The setting is stored for the remote control
currently in use.
75