BMW Z4 sDrive30i Owner's Manual page 37

Storing
1. Switch on radio readiness or the ignition,
refer to page 41.
2. Adjust the seat and exterior mirrors to the
desired positions.
3. Press the button.
The LED in the button lights up.
4. Press the desired memory button 1 or 2: the
LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Call-up
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ment could result in an
Convenience mode
1. Unlock and open the driver's door or switch
on radio readiness, refer to page 41.
2. Briefly press the desired memory
button 1 or 2.
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
Safety feature
1. Close the driver's door and switch the igni-
tion on or off, refer to page 41.
2. Press the desired memory button 1 or 2
and keep it pressed until the adjustment
process has been completed.
If the button was pressed accidentally:
Press the button again; the LED goes out.
Online Edition for Part no. 01 41 2 602 118 - © 01/09 BMW AG
accident.<
Call-up with the remote control
The driver's seat position last stored is stored
for the remote control currently in use.
You can select whether the seat should be reset
to that position.
When this Personal Profile function is
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Failure to do so could result in damage to the
objects if the seat were to move
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
For operating principle, refer to page 58.
1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
Press button 2.
2.
3. Lightly push button 1 in the turn indicator
lever down repeatedly until the symbol
appears in the display.
Press button 2.
4.
rearward.<
35