Resetting To Factory Settings - BMW Z4 sDrive30i Owner's Manual

Formats and units of measure
You can set formats and units of measure.
You can change the units for fuel consumption,
route/distance, temperature and pressure.
1. Switch on the ignition, refer to page 41.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3. Press button 2.
Use button 1 to select desired format or
4.
desired unit of measure, e.g. for fuel con-
sumption.
> Fuel consumption: mpg, km/l,
l/100km
> Distance covered: mls, km
> Time: 12h, 24h format
> Date: day.month dd.mm,
month/day mm/dd
> Temperature: 6, 7
5. Press button 2.
6. Use button 1 to make the setting.
7. Press button 2.
The setting is stored for the remote control
currently in use.
Online Edition for Part no. 01 41 2 602 118 - © 01/09 BMW AG

Resetting to factory settings

You can reset the settings for formats and units
of measure to factory settings.
1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
2. Press button 2.
3. Use button 1 to select "RESET".
4. Press button 2 until
The settings are reset.
The setting is stored for the remote control
currently in use.
is displayed.
59