BMW Z4 sDrive30i Owner's Manual page 140

1 2
> DBC failed. No power braking sup-
port during emergency braking
> Brake overheated or
> High brake load
Indication in US models
Brake pads worn
Indication in Canadian models
Brake pads worn.
Lights up in red:
> Starter failed or
> Ignition malfunctioning. Engine
restart only possible when brake is
depressed or
> Lighting system failed. Low beams/
tail lamps and brake lamps still
operational. All other lamps failed
Lights up in yellow:
> Control of the brake lamps failed or
> fuel supply malfunctioning
Flashing:
Dynamic Stability Control DSC or
Dynamic Traction Control DTC is con-
trolling drive and braking forces, refer
also to page
Dynamic Traction Control DTC acti-
vated, refer also to page
Dynamic Stability Control DSC and
Dynamic Traction Control DTC deacti-
vated, refer also to page
138
Online Edition for Part no. 01 41 2 602 118 - © 01/09 BMW AG
Cause
65
65
65
What to do
You can continue your journey, but
moderate your speed and exercise due
caution. Have the system checked as
soon as possible.
Allow the brake to cool down. You can
continue your journey, but moderate
your speed and exercise due caution.
You can continue your journey, but
moderate your speed and exercise due
caution.
Have the condition of the brake pads
checked without delay.
Have the condition of the brake pads
checked without delay.
Have the system in question checked
immediately.
The engine cannot be restarted.
Depress the brake to restart the engine.
You can continue your journey, but
moderate your speed and exercise due
caution. Have the system in question
checked immediately.
Driving stability limited during accelera-
tion and cornering.
Driving style must be readjusted.