Daytime Running Lamps - BMW 328i Owner's Manual

You can adjust the operating period or deacti-
vate the function.
For operating principle refer to page 58.
Lightly push button 1 in the turn indicator
1.
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
2. Press button 2.
3. Lightly push button 1 in the turn indicator
lever down repeatedly until the symbol
appears in the display.
4. Press button 2.
Use button 1 to select:
5.
>
The function is deactivated.
> ...
Select the corresponding duration, e.g.
40 seconds.
6. Press button 2.
The setting is stored.

Daytime running lamps

The daytime running lamps come on in lamps-
off, parking lamps or automatic headlamp con-
trol position. The light output is lower than with
the low-beam headlamps.
74
Online Edition for Part no. 01 41 0 012 865 - © 08/06 BMW AG
If desired, the light switch can remain in auto-
matic headlamp control position. The exterior
lamps are automatically switched off after the
vehicle is parked.
If the light switch remains in parking lamps posi-
tion, the parking lamps are lit after the ignition is
switched off.
Activating/deactivating daytime
running lamps*
For operating principle refer to page 58.
1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
Press button 2.
2.
3. Lightly push button 1 in the turn indicator
lever down repeatedly until the symbol
appears in the display.
4. Press button 2.
5. Use button 1 to select:
>
Daytime running lamps activated.
>
Daytime running lamps deactivated.
6. Press button 2.
The setting is stored.