Resetting To Factory Settings; Formats/Units Of Measure - BMW 328i Owner's Manual

11 Adjusting settings
> Confirmation signals when locking and
unlocking the vehicle
>
Response during unlocking
procedure 19
> Automatic locking
> Pathway lighting
> Daytime running lamps
> Triple turn signal activation
*
> Seat memory
Exiting displays
The outside-temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Formats and units of measure
You can set formats and units of measure. The
settings are stored for the remote control cur-
rently in use, refer also to Personal Profile on
page 18.
1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
2. Press button 2.
3. Use button 1 to select desired format or
desired unit of measure, e.g. for fuel con-
sumption.
Online Edition for Part no. 01 41 0 012 865 - © 08/06 BMW AG
20
21
73
74
46
35
> Fuel consumption: mpg, km/l,
l/100km
> Distance covered: mls, km
>
Time: 12h, 24h mode
> Date: day.month dd.mm,
month/day mm/dd
> Temperature: 7, 6
4. Press button 2.
5. Use button 1 to make the setting.
6. Press button 2.
The setting is stored.

Resetting to factory settings

You can reset the settings for formats and units
of measure to factory settings. The settings are
stored for the remote control currently in use,
refer also to Personal Profile on page 18.
1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
2. Press button 2.
3. Use button 1 to select "RESET".
59