Make An Internal Call (For Vt1010T / Vt1515 / Vt1616 Only); Intercom Another Handset (For Vt1010T / Vt1515 / Vt1616 Only); Transfer An External Call To Another Handset (For Vt1010T / Vt1515 / Vt1616 Only ); Make A 3 -Way Conference Call (For Vt1010T / Vt1515 / Vt1616 Only ) - VTech VT1010 User Manual

Make an Internal Call ( For VT1010T / VT1515 / VT1616 only )
This feature is only applicable when there are at least two registered handsets. It allows you to make internal
calls, transfer external calls from one handset to another handset and make conference calls. If the called
handset is not answered within 20 seconds, the called handset will stop ringing and the calling handset will
If only two return to standby mode.
•
handsets are
Intercom Another Handset ( For VT1010T / VT1515 / VT1616 only )
registered to
1. In idle mode, press
the base
2. Enter the desired handset number to intercom with.
station, press
<INT> will
3. The called handset rings and press
connect to
Transfer an External Call to another handset ( For VT1010T / VT1515 / VT1616 only )
another
During an external call:
handset
1. Press
immediately.
2. Press <OK> to select the desired handset to intercom with.
3. The external call is put on hold automatically and the called handset rings.
4. Press
5. Press
the external party.
6. The external call is transferred to the called handset.
Make a 3-way Conference Call ( For VT1010T / VT1515 / VT1616 only )
The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties
can share the conversation and no network subscription is required.
During an external call:
1. Press
2. Press <OK> to select the desired handset to intercom with.
3. The external call is put on hold automatically and the called handset rings.
4. Press
5. Press and hold
Any handset hangs up during a conference call will leave the other handset still in connection with the external
call.
11
and the registered handsets will display except the calling handset.
and / to select INTERCOM.
on the called handset to establish an internal call.
on the calling handset or put the calling handset on the charging cradle to end the current call with
and / to select INTERCOM.
on the called handset to establish an internal call.
on the calling handset to establish the conference call.
www.vtech.com
on the called handset to establish the internal call.