Handset Settings; Alarm Settings; Turn On/Off The Alarm; Set The Alarm Time - VTech VT1010 User Manual

Handset Settings

Alarm Settings

You can use this phone to set an alarm clock. When an alarm is set, the
alarm time is reached, the
• If ON is
of 45 seconds. You can press any key to disable the alarm. If snooze function is activated, the alarm will sound
selected, you
again at the end of the snooze period of seven minutes. You can also press and hold
will be asked
function.
to set the
.
alarm time

Turn on/off the Alarm

1. Press
2. Press OK and
3. Press OK and
4. Press OK to confirm.

Set the Alarm Time

1 Press
2 Press OK and
3 Press OK and
4 Press OK to confirm.
5 Enter the alarm time
6 Press OK to set the snooze function.
7 Press OK and
8. Press OK to confirm.
Note:
a. Key press is still applicable if handset keypad is locked and when the alarm time is reached.
b. The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to VOLUME
OFF, the alarm still sounds at VOLUME 1 level.
c. During an external call or internal call, if an alarm is set and when the alarm time is reached, the
will still flash. An alarm tone will be emitted from the earpiece to notify user the alarm time is reached. Once user
press any key or press and hold
d. During paging or ringing, the alarm will not sound when the alarm time is reached. However, if snooze function is
enabled, the alarm will sound again at the end of the snooze period provided that it's not ringing or in paging mode
at the end of the snooze period
19
and "ALARM ON" flash on the LCD ringing with the alarm melody for a duration
and / to select HS settings.
/ to select Alarm.
/ to select ON/OFF.
and / to select HS SETTINGS
/ to select ALARM.
/ to select ON/OFF.
/ to select SNOOZE ON or SNOOZE OFF.
to disable the alarm, it will revert to the call duration screen.
.
www.vtech.com
displays on the LCD. When the
to terminate the snooze
and "ALARM ON"