Setting Up Your Machine - JUKI HZL-35Z Instruction Manual

Be sure to wipe off any surplus oil from needle
plate area before using your machine the first
time.
FOOT CONTROLLER
Connect the plug of the foot controller into the
machine socket (1) and your wall outlet (2) as
illustrated.
LIGHT SWITCH
Your machine will not operate until the light
switch is turned on. The same switch controls
both the power and the light.
When servicing the machine, or changing
needles, etc., machine must be disconnected
from the power supply.
12

SETTING UP YOUR MACHINE

CAUTION
Set light switch at "OFF"
Poner el Interruptor de corriente/
luz de velocidad en "OFF"
Foot controller
Control por pedal
Always disconnect the machine from power supply by
removing the plug from the socket-outlet.