Advertisement
3.3 PCI Add-on Card Installation
3.4 CDROM/HDD Installation -
YY-W2 Server Chassis is designed to install drive peripherals by
rails, it allow integrator to pre-assembly peripherals for fasten
system assembly as module feed in.
Remove the tail gate bracket,
install PCI card into
motherboard, and screw in
bracket to rear window of
chassis.
The chassis could be
optional required A Card
Clamp Holder which is used
to clamp the Add-on Card
for avoiding any popping
issue.
To remove The Clamp
Holder first, install Add-on
Cards as usual; adjust the
holder's height for clamping
well the Add-on Cards.
ZZ17-W2001-B
7
Advertisement
