Table 28. Removal steps of LCD bezel assembly (continued)
When installing: Make sure that all the latches are attached firmly. Then secure the bezel with the screws.
2030 Integrated camera
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 50
•
"1020 Bottom slot cover" on page 51
•
"1040 Hard disk drive or solid state drive assembly" on page 53
•
"1070 Keyboard" on page 57
•
"1090 Top case assembly" on page 60
• "1130 System board assembly, fan assembly, and backup battery" on page 65
•
"2010 LCD unit" on page 71
•
"2020 LCD bezel assembly" on page 73
Table 29. Removal steps of integrated camera
When installing: Make sure that the connector is attached firmly.
74
Hardware Maintenance Manual