Table 27. Removal steps of LCD unit (continued)
When installing: Make sure that the connector is attached firmly to the system board.
2020 LCD bezel assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 50
•
"1020 Bottom slot cover" on page 51
•
"1040 Hard disk drive or solid state drive assembly" on page 53
•
"1070 Keyboard" on page 57
•
"1090 Top case assembly" on page 60
• "1130 System board assembly, fan assembly, and backup battery" on page 65
•
"2010 LCD unit" on page 71
Table 28. Removal steps of LCD bezel assembly
Step
Screw cap
1
Screw (quantity)
M2 × 4 mm, wafer-head, nylon-coated (4)
Torque
Color
Black
0.181 Nm
(1.85 kgfcm)
.
Chapter 8
Removing and replacing a FRU
73