Introduction
FIG. 4 Laser Radiation warning
AXR-MSE Wireless Mouse and Keyboard Controller
The AXR-MSE is the receiver/processor component of the PC Presenter. The AXR-MSE receives
RF or IR signals from the TXC-MS(L) transmitter using the attached RF receiving antenna or an
external IR sensor. The AXR-MSE connects between the PC keyboard and mouse cables, and the
keyboard and mouse ports on the PC CPU. The AXR-MSE uses a standard four-pin captive wire
AXlink connector to connect to an AMX Central Controller.
AXR-MSE Specifications
Dimensions (HWD)
Power
Enclosure
Receive frequency
Front Panel
AXlink
DIP switch
MOUSE LED
KEYBOARD LED
DATA LED
4
• 1.86" x 5.63" x 4.06" (4.72 cm x 14.29 cm x 10.31 cm)
• Height with antenna: 5.49" (13.96 cm)
• Depth with connectors - 4.06" (4.47 cm) and with antenna - 5.12" (13.00 cm)
65 mA (max draw) @ 12 VDC
Metal with black matte plastic
RF: 418 MHz standard (other frequencies are available)
Green LED indicates AXlink communication as follows:
• Off indicates no power or the controller is not functioning properly
• One Blink per Second indicates normal operation. Device numbers match the
programmed device numbers in the Axcess program on the master.
• Full On indicates that there is no AXlink activity.
8-position sets the AXlink device ID
Red LED indicates mouse data transmission activity
Red LED indicates keyboard data transmission activity
Red LED indicates RF or IR signal reception
PC Presenter