Led Indicators - AMX Computer Control PC Presenter Instruction Manual

Make sure to connect only the GND wire on the AXlink connector when using a 12 VDC power
supply. Do not connect the PWR wire to the AXlink connector's PWR opening.

LED indicators

When the AXR-MSE is powered up, the front panel LEDs light to indicate the status of the unit as
described below:
PC Presenter
All LED's lighting sequentially from left to right indicates that the AXR-MSE
firmware is loaded and running.
Blinking pattern that alternates between the Mouse + Data LED's and the Keyboard
LED indicates that the AXR-MSE is running on boot code only, and has no downloaded
program. You must download program code to operate the AXR-MSE.
Installing the PC Presenter
17