M - Display Available Memory; T - Long Form List Of Stored Keycodes; Display Version And Copyright Info; Programming Transmitter Pushbuttons - AMX Computer Control PC Presenter Instruction Manual

C:\>rem Code : 128
C:\>rem Code : 129
C:\>rem Code : 130
PRGM EX. 7

M - Display available memory

Press
"M"
Presenter:
C:\>rem Memory available : 60436 bytes
PRGM EX. 8

T - Long form list of stored keycodes

Press
"T"
PC Presenter memory, in long form. A long form listing of keycodes contains the button code
number, the size of the saved keycode, and the keystrokes recorded. The following example
represents the keycode "Button 1" on button 128:
C:\>rem Code : 128
C:\>rem 32 F0 32 3C F0 2C 2C F0 2C 44 F0 44 31
PRGM EX. 9
V - Display version and copyright info
Press
"V"
information, as shown in the example below:
C:\>rem Firmware version x1.001
C:\>rem Copyright AMX Corporation 2000
PRGM EX. 10

Programming Transmitter Pushbuttons

The program the transmitter pushbuttons.
1. Begin at a DOS prompt on the PC that is connected to the AXR-MSE.
2. At the DOS prompt, enter program mode by selecting and holding the following keys on the
PC keyboard:
For PC keyboards with left and right <Ctrl> and <Alt> keys, only the left<Ctrl><Alt> "."
combination will work.
3. When these keys are released, program mode will be indicated by the following characters at
the DOS prompt:
C:\>rem Press command key or transmitter button
C:\>rem
PRGM EX. 11
The characters
program mode, waiting for a command key.
PC Presenter
Size : 24 bytes
Size : 24 bytes
Size : 24 bytes
at the program/command prompt to display the amount of memory available in the PC
at the program/command prompt to display a listing of the keycodes currently saved in
Size : 24 bytes
at the program/command prompt to display the firmware version number, and copyright
CTRL, then ALT then "." (period key).
before the blinking cursor indicate that the PC Presenter is in
"C:\>rem"
Programming the PC Presenter
21