Using The Oldesign Engraving Program - AMX Computer Control PC Presenter Instruction Manual

Using the OLDesign Engraving Program

Using the OLDesign Engraving Program
The AMX OLDesign software program is a Windows-based design tool for creating panel overlays,
pushbutton names, and pushbutton operation descriptions. The operation descriptions are used
when the Axcess operating software is programmed. OLDesign also contains an online help system
that describes producing custom overlay designs and pushbutton descriptions, and then storing
them on your computer. FIG. 20 shows the OLDesign main window and a sample TXC-MS overlay
design. Refer to the OLDesign for Windows Quick Reference Guide for command instructions that
can be used with the OLDesign online help system.
FIG. 20 OLDesign main window with example TXC-MS overlay
PC Presenter 27