Txc-Ms(L) Transmitter - AMX Computer Control PC Presenter Instruction Manual

Introduction
TXC-MS(L) Specifications
Dimensions (HWD)
Power
Enclosure
DIP switch
Pushbuttons
Mouse controls
Range
Range
Weight
Included accessories
Optional accessories

TXC-MS(L) Transmitter

The TXC-MS(L) is an ergonomically designed pushbutton transmitter with up to 26 pushbuttons,
an optional laser trigger (TXC-MSL only), and PC mouse disc. The pushbuttons activate PC
functions or Axcess Push_Commands via infrared (IR) or radio frequency (RF) transmission.
FIG. 2 shows the PC Presenter transmitter and factory pushbutton configuration. A DIP switch
located in the battery compartment sets the transmitter for either RF or IR control. For information
on setting the TXC-MS(L) for RF or IR control, refer to the Setting the TXC-MS(L) transmitter
DIP switch subsection.
Pushbuttons
Left mouse
button
Pushbuttons
FIG. 2 TXC-MS(L) mouse controls and 24 pushbutton locations
2
8.50" x 2.00" x 1.56" (21.59 cm x 5.08 cm x 3.96 cm)
3.0 VDC (two AA alkaline batteries - supplied)
Molded black matte plastic
8-position sets IR or RF mode and radio mode
Up to 26 pushbuttons (with custom overlay)
• 16-position mouse disc (two speeds), left and right mouse buttons
• Trigger switch operates left mouse button on TXC-MS
• RF: 1-way @ 200 ft (60.96 m) and 2-way @ 500 ft. (152.40 m)
• IR: 30 ft (9.14 m)
• IR: 455 KHz
• RF: 418 MHz standard (315 MHZ and 433.9 MHz available)
• 0.35 lbs (0.16 kg)
• 0.25 lbs (0.11 kg)
• Blank overlay
• 2 AA alkaline batteries
• Custom logos
• Color text and borders on engraved overlay
• Multiple engraved overlay colors
• Laser pointer on TXC-MSL (L - laser pointer)
Overlay (blank is standard)
Right mouse button
pushbutton
Mouse disc
Pushbutton
Overlay (blank is standard)
PC Presenter