Step 2: Connect The Solo System To Power - Bose Solo Owner's Manual

System Setup

Step 2: Connect the Solo system to power

A. Plug one end of the power cord into the AC input connector.
B. Plug the other end into a live AC power (mains) outlet.
A few moments after applying power, the system emits two tones indicating
that it is ready to use.
Note: Bose recommends using a safety agency-approved surge protector on all
electronic equipment. Voltage variations and spikes can damage electronic
components in any system.
8 - English
AC input connector
100-240V
50/60 Hz
50W